Does S switch support policy route ?

5

#DIV/0!

Other related questions:
Does an AR router support policy-based routing
All models of AR routers support policy-based routing.

How to configure policy route on S switch?
For example: we will redirect the traffic will will enter GE2/0/1,the source ip is 192.168.100.0/24, the nexthop will be redirected to 10.1.20.1,the source ip is 192.168.101.0/24, the nexthop will be redirected to 10.1.30.1�?working flow�?1. Configure acl to match the traffic which need be redirected. [Switch] acl 3001 [Switch-acl-adv-3001] rule permit ip source 192.168.100.0 0.0.0.255 [Switch-acl-adv-3001] quit [Switch] acl 3002 [Switch-acl-adv-3002] rule permit ip source 192.168.101.0 0.0.0.255 [Switch-acl-adv-3002] quit 2. Configure traffic classification. [Switch] traffic classifier c1 operator or [Switch-classifier-c1] if-match acl 3001 [Switch-classifier-c1] quit [Switch] traffic classifier c2 operator or [Switch-classifier-c2] if-match acl 3002 [Switch-classifier-c2] quit 3. Configure traffic behavior. [Switch] traffic behavior b1 [Switch-behavior-b1] redirect ip-nexthop 10.1.20.1 [Switch-behavior-b1] quit [Switch] traffic behavior b2 [Switch-behavior-b2] redirect ip-nexthop 10.1.30.1 [Switch-behavior-b2] quit 4. Configure traffic policy. [Switch] traffic policy p1 [Switch-trafficpolicy-p1] classifier c1 behavior b1 [Switch-trafficpolicy-p1] classifier c2 behavior b2 [Switch-trafficpolicy-p1] quit 5. Apply the traffic policy on the interface. [Switch] interface gigabitethernet 2/0/1 [Switch-GigabitEthernet2/0/1] traffic-policy p1 inbound [Switch-GigabitEthernet2/0/1] return Notes�?we can configure multiple classifier and behavior in one policy.

How many policy routes can be supported by S switch ?
The S switch can support 4 policy routes, it means that it can support 4 nexthops in one traffic behavior.

Whether the firewall supports forward policy-based routing
The firewall supports forward policy-based routing. If an outbound interface is configured for a policy-based route, the firewall determines whether the interface is Up. If yes, the firewall forwards a received packet based on the policy-based route. If no, the policy-based route does not take effect, and the firewall looks up the FIB table for a matching route for packet forwarding based on the destination IP address of the packet. If a next-hop address is configured for the policy-based route, the firewall looks up the FIB table based on the next-hop IP address. If a match is found, the firewall forwards the packet based on the policy-based route. If no match is found, the policy-based route does not take effect, and the firewall looks up the FIB table for a matching route for packet forwarding based on the destination IP address of the packet.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top