Why cannot an OSPF route contained in the LSDB/LSA be queried in the routing table on an S series switch

3

Question: Why cannot an OSPF route contained in the LSDB/LSA be queried in the routing table?

Answer: Perform the following operations on the S series switch to solve the problem.
Check whether the IP address is valid.
Check whether the forwarding address is known and reachable.
Check whether the route aggregation or route import is correct.
Check whether a different mask or IP address is used in P2P connection.
Check whether the advertise route list is configured.
Check whether the connection with the backbone area is proper.
Check whether OSPF is enabled on the secondary IP address instead of the primary IP address.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top