S series switches' support for routing

1

For details about routing features supported by S series switches of different models:
- S12700: See "IP Unicast Routing" in S12700 Product Use Precautions.
- S7700 and S9700: See "IP Unicast Routing" in S7700&S9700 Product Use Precautions.
- S9300: See "IP Unicast Routing" in S9300&S9300E&S9300X Product Use Precautions.
- S1720, S2700, S3700, S5700, and S6700: See "IP Unicast Routing" in S1720&S2700&S3700&S5700&S6700 Product Use Precautions.
- S600: See "IP Unicast Routing" in S600-E Product Use Precautions.

Other related questions:
Whether the S-series switches support ISP routing features
Not support

Do S series switches support static multicast routes
For S series switches, static multicast routes are supported only by S series modular switches, S3700EI, S3700HI, S5720S-SI, S5720SI, S5700EI, S5710EI, S5720EI, S5700HI, S5710HI, S5720HI, S6700EI, S6720EI and S6720S-EI. You can run the igmp static-group command to configure a static multicast group, and the ip rpf-route-static command to configure a static multicast route.

Routes imported into IS-IS are invalid on S series switches
Q: Why are routes imported into IS-IS invalid? A: For S series switches supporting IS-IS, if the IS-IS level is not set when routes are imported into IS-IS, level-2 IS-IS is used by default. That is, routes are imported into level-2 IS-IS. To import routes to areas of other levels, specify the area level.

Configure the priority of an OSPF route on an S series switch
The routing protocols may share and select the routing information because a switch may run multiple dynamic routing protocols simultaneously. In this case, a priority should be set for each routing protocol. When different protocols find multiple routes to the same destination, the route discovered by the protocol with a higher priority is preferred. On an S series switch, you can run the preference command in the OSPF process view to configure the OSPF priority. Perform the following operations: 1. Run the ospf [ process-id ] command in the system view to enter the OSPF process view. 2. Run the preference [ ase ] { preference | route-policy route-policy-name } * command to configure the OSPF priority. The parameters are described as follows: ase: indicates the priority of the AS-External route. preference: indicates the OSPF route priority. A smaller value indicates a higher priority. route-policy route-policy-name: indicates the priority for specified routes in the routing policy. The default OSPF priority value is 10. When an ASE is specified, the default OSPF priority is 150. For example, set the priority of routes in OSPF process 100 to 150 as follows: [HUAWEI] ospf 100 [HUAWEI-ospf-100] preference 150

S series switch routing table specification
Hello, I now have no way to answer this question, for the specifications of the performance class, you can call 4008229999 pre-sale manual service consulting.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top