Routing table capacity supported by S series switches


For information about the routing table capacity, contact Huawei iKnow.Kindly click Live Chat service for support.

Other related questions:
S series switch routing table specification
Hello, I now have no way to answer this question, for the specifications of the performance class, you can call 4008229999 pre-sale manual service consulting.

How to clear routing table on S series switch
1. For static routes in a routing table, run the undo ip route-static command to delete them one by one. 2. For dynamic routes, run the reset command to restart the corresponding process and update the routing table. For example, to delete OSPF routing entries, run the reset ospf process command. Caution: Restarting the routing protocol will cause a loss of routing entries, and the switch will relearn routing entries.

How to check the routing table on an S series switch
Run the display ip routing-table command on the switch to check the IPv4 routing table. For example: [HUAWEI]display ip routing-table Perform the following steps to check the routing table through the web system on a switch that supports web-based management: 1. Choose IP Routing > IPv4 Route in the navigation tree to access the IPv4 Route page. Click the IPv4 Routing Tables tab. 2. Set the search criteria. 3. Click Query to view all the matching records. Note: You can query the routing table on the web system of the Classics edition, but cannot query the table on the web system of the EasyOperation edition.

Commands for checking OSPF routing table faults on S series switches
You can run the following commands on an S series switch supporting OSPF to check information about OSPF routing table faults: display ospf peer The command output displays information about an OSPF neighbor. display ospf routing The command output displays OSPF routing table entries. display ospf lsdb The command output displays information about an LSDB of OSPF.

Why are routes in the OSPF routing table on an S series switch in the inactive state
A policy that filters all OSPF routes may be configured in an OSPF process. As a result, all routes in the OSPF routing table are in the inactive state.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top