How are addresses assigned and how can to set the address status to idle

1

An expired address is preferentially assigned to the user who has applied for this address. A new online user is assigned an address from idle addresses. If no address is idle, the user is assigned an address from expired addresses. Run reset ip pool name ip-pool-name expired to set the address status to idle.

Other related questions:
How does an AR reclaim IP addresses
You can manually reclaim IP addresses that cannot be released due to exceptions. The reclaimed IP addresses become idle and can be re-allocated to clients. The command is as follows: reset ip pool { interfacepool-name | nameip-pool-name } { start-ip-address [ end-ip-address ] | all | conflict | expired | used } Conflicting, expired, and used IP addresses can be reclaimed.
To reclaim the allocated IP address of 10.1.1.5 that has been bound to a MAC address, use the following method:
- For the global address pool
<Huawei> reset ip pool name pool1 used //Release the allocated IP address.
<Huawei> system-view   //If IP addresses are not bound to MAC addresses, you do not need to perform the following operations.
[Huawei] ip pool pool1
[Huawei-ip-pool-pool1] undo static-bind ip-address 10.1.1.5 //Remove the static binding.
- For the address pool:
<Huawei> reset ip pool interface vlanif100 used //Release the allocated IP address.
<Huawei> system-view   //If IP addresses are not bound to MAC addresses, you do not need to perform the following operations.
[Huawei] interface vlanif 100  
[Huawei-Vlanif100] undo dhcp server static-bind ip-address 10.1.1.5  //Remove the static binding.
Note: If a used IP address is within the IP address range specified by the command, performing the preceding operations may cause unexpected logout.

IP address planning of a storage device
Service network ports on the same controller must reside in different network segments and also must reside in different network segments from the management network port of the controller.

Number of DHCP access users supported by the AR
Hi, I cannot answer this question. For details about product specifications, dial 4008229999 to ask for artificial service and consulting.

Can the TE40 be assigned a dynamic IP address?
Dynamic IP addresses can be configured for TE series endpoints, but must register with the GK or SIP server.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top