How to replace a Windows DHCP server with a Linux DHCP server


If the operating system of an S series switch (except an S1700 switch) that functions as a DHCP server is switched from Windows to Linux, its IP address remains unchanged and no other configuration is required.

Other related questions:
DHCP configuration is ineffective on an AR
The possible causes for ineffective DHCP configuration as follows: 1. DHCP is not enabled on the AR. 2. The address pool is configured incorrectly.3. The IP network segment are not specified on the interface of the DHCP server connected to the client, or the specified IP network segment and address pool are different. 4. If ACL resources are used up, the DHCP command that is run globally or on an interface does not take effect.

How to change the Linux system of the S series switch used as the DHCP server to the Windows system
When an S series switch excluding the S1700 functions as the DHCP server, the IP address remains unchanged if the Linux system is changed by the Windows system. There is no need to change other configurations.

Can the OceanStor ReplicationDirector server be deployed on Windows or Linux
The OceanStor ReplicationDirector server can be deployed on Windows or Linux.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top