DHCPv6 support on S series switch

3

Versions and models of S series switches (except S1700 switches) that support DHCPv6 are as follows:
- S9300 and S7700 series switches in V100R003 and later versions
- S3700SI, S3700EI, S5700SI, and S5700EI switches in V100R005 and later versions
- S3700HI, S5700HI, and S6700EI switches in V100R006 and later versions
- S9700 series, S5700LI, S5700S-LI, S5710-C-LI, and S5710EI switches in V200R001 and later versions
- S2750EI and S5710HI switches in V200R003 and later versions
- S12708 and S12712 switches in V200R005 and later versions
- S1720, S2720EI, and S5720HI switches in V200R006 and later versions
- S5720EI switches in V200R007 and later versions

Other related questions:
DHCPv6 support on S series switch
Versions and models of S series switches (except S1700 switches) that support DHCPv6 are as follows: - S9300 and S7700 series switches in V100R003 and later versions - S3700SI, S3700EI, S5700SI, and S5700EI switches in V100R005 and later versions - S3700HI, S5700HI, and S6700EI switches in V100R006 and later versions - S9700 series, S5700LI, S5700S-LI, S5710-C-LI, and S5710EI switches in V200R001 and later versions - S2750EI and S5710HI switches in V200R003 and later versions - S12708 and S12712 switches in V200R005 and later versions - S1720, S2720EI, and S5720HI switches in V200R006 and later versions - S5720EI switches in V200R007 and later versions

DHCPv6 Relay configuration on S series switch
S series switches (except S1700 switches) support the DHCPv6 relay function, which can be configured using either of the following methods: - Configure an IPv6 address for the DHCPv6 server or the next-hop relay agent on an interface. [HUAWEI] dhcp enable [HUAWEI] ipv6 [HUAWEI] interface vlanif 100 [HUAWEI-Vlanif100] ipv6 enable [HUAWEI-Vlanif100] dhcpv6 relay destination fc00:1::1 //Enable DHCPv6 relay and configure an IPv6 address for the DHCPv6 server or the next-hop relay agent. - Bind a DHCPv6 server group on an interface. [HUAWEI] dhcp enable [HUAWEI] ipv6 [HUAWEI] dhcpv6 server group DHCPv6-srv1 //Create a DHCPv6 server group. [HUAWEI-dhcpv6-server-group-DHCPv6-srv1] dhcpv6-server fc00:1::1 //Add a DHCPv6 server with IPv6 address fc00:1::1 [HUAWEI-dhcpv6-server-group-DHCPv6-srv1] quit [HUAWEI] interface vlanif 100 [HUAWEI-Vlanif100] ipv6 enable [HUAWEI-Vlanif100] dhcpv6 relay server-select DHCPv6-srv1 //Bind the DHCPv6 server group on the interface. For details about DHCPv6 relay support of S series switches, see information on the right.

Does the S series switch used as the DHCPv6 relay agent support PD relay
The S series switch (excluding the S1700) used as the DHCPv6 relay agent supports PD relay starting from V100R006C00. The switch can query, delete, and automatically generate routing information in the DHCPv6-PD table. You can manually configure routing information in the DHCPv6-PD table. The routing information in the DHCPv6-PD table is not lost after the switch restarts.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top