Can both the DHCP server and VRRP be configured on an S series switch

11

For the S series switch excluding the S1700 starting from V100R006C00, the DHCP server assigns addresses only to the master device in a VRRP group. The IP address pool information on the master device cannot be synchronized to the backup device in the VRRP group. Therefore, you are advised not to configure the DHCP server and VRRP.

Other related questions:
Method to configure DHCP server on S series switches
For S series switches excluding the S1700, the switch can function as the DHCP server to assign IP addresses to DHCP clients. Two configuration modes are available: - Interface address pool: This mode is simple. It only applies to scenario where the DHCP server and DHCP client are located on the same network segment, that is, there is no need to deploy the DHCP relay agent. - Global address pool: It applies to the scenario where the DHCP server and DHCP client are located on different segments, that is, the DHCP relay agent needs to be deployed. It also applies to the scenario where the DHCP server and DHCP client are located on the same network segment and IP addresses to be assigned to clients on multiple interfaces.

Can DHCP relay and DHCP server be configured in a super-VLAN on an S series switch
On S series switches excluding the S1700, DHCP relay and DHCP server be configured on the VLANIF interface of a super-VLAN since V100R003.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top