Interconnect an NLB server with an S series switch

2
Other related questions:
Can an S series switch function as the NTP server
The following is an example of configuring the NTP server function in broadcast mode. [HUAWEI] ntp-service refclock-master 3 //Configure the local clock as the NTP master clock. [HUAWEI] undo ntp-service server disable //Enable the IPv4 NTP server function. [HUAWEI] interface vlanif 100 [HUAWEI-Vlanif100] ip address 10.1.1.1 24 //Configure an IP address for the server. [HUAWEI-Vlanif100] ntp-service broadcast-server //Configure the local switch as the NTP broadcast server.

Configure NAT server on S series switches
S7700, S9700, and S9300 series modular switches use SPUs to support the NAT server function.

Configuring an S series switch as an FTP server
Perform the following operations to configure an S series switch (except the S1700) as an FTP server: 1. Configure an IP address for the switch. 2. Configure the switch as an FTP server. system-view [HUAWEI] ftp server enable //Enable the FTP service. [HUAWEI] aaa [HUAWEI-aaa] local-user u1 password irreversible-cipher ftppwd@6789 //Set the FTP user name to u1 and password to ftppwd@6789. [HUAWEI-aaa] local-user u1 service-type ftp //Set the access type of the user to FTP. [HUAWEI-aaa] local-user u1 privilege level 15 //Set the user priority. [HUAWEI-aaa] local-user u1 ftp-directory flash:/ //Specify the directory that the user can access, which may be cfcard:/ for some S series modular switches. [HUAWEI-aaa] return

Method to configure DHCP server on S series switches
For S series switches excluding the S1700, the switch can function as the DHCP server to assign IP addresses to DHCP clients. Two configuration modes are available: - Interface address pool: This mode is simple. It only applies to scenario where the DHCP server and DHCP client are located on the same network segment, that is, there is no need to deploy the DHCP relay agent. - Global address pool: It applies to the scenario where the DHCP server and DHCP client are located on different segments, that is, the DHCP relay agent needs to be deployed. It also applies to the scenario where the DHCP server and DHCP client are located on the same network segment and IP addresses to be assigned to clients on multiple interfaces.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top