Does the AR support the web

24

Starting from V200R002C01, the AR supports the web platform. You can use the web platform to manage and maintain AR routers on the GUI.
V200R005C20SPC200 is recommended.
For details, see Access Router Product Information Center.

Other related questions:
Does the AR series support the web NMS
The AR series supports the web network management system (NMS) from V200R002C01. You can use the web network management system to manage and maintain AR series.

Can the portal authentication function be configured through the web NMS on an AR router
The web NMS of an AR router does not support the portal authentication function. If you want to configure the portal authentication function using a command line, see the following URLs: - For details on how to configure an external portal, see the URL: Configure an example of controlling internal users to access the network through external portal authentication . - For details on how to configure an internal portal, see the URL: Configure an example of controlling internal users to access the network through built-in portal authentication.

How to configure WLAN AC through the web platform on the AR
WLAN AC can be configured through the web platform on all AR routers of V200R005C20 and later versions. The procedure for configuring WLAN AC through the web platform on an AR is as follows: 1. Enable the DHCP function. 2. Create the mVLAN interface. 3. Create the service VLAN interface. 4. Configure AC system parameters. 5. Create an ESS interface. 6. Select the wireless service type. 7. Configure the AP. 8. Configure the radio. 9. Configure wireless service. 10. Confirm the configuration. V200R005C20 to V200R007C00, for details, see Example for Configuring the WLAN AC Service(V200R005C20 to V200R007C00). V200R008C00, for details, see Example for Configuring Basic WLAN AC Services(V200R008).

Method of creating a VLAN through the web NMS on an AR router
The web NMS of the AR series routers does not support VLAN creation or adding of interfaces to a created VLAN. You can create a VLANIF interface, and add the interface to the VLAN. 1. Choose LAN Access > LAN >VLAN Interface to enter the VLAN interface configuration page. 2. In the VLAN Interface List area, click Create. 3. On the Create VLAN Inter page, select parameters or enter values according to requirements to configure a VLAN interface. On the NMS page, only interfaces of the access and trunk types can be configured. Hybrid type interfaces cannot be configured. Use command lines to create a VLAN. In the system view, run the vlan command or the vlan batch command.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top