Do I need to delete configurations on the interfaces of S series switches when they are configured to create an Eth-Trunk

2

When you configure an Eth-Trunk on S series switches (except the S1700), delete configurations on the member interfaces. Otherwise, the Eth-Trunk will fail.

Other related questions:
Do I need to enable STP after an Eth-Trunk is configured on S series switches
You do not need to configure STP after an Eth-Trunk is configured on S series switches (except the S1700).

How to configure the IP address for an Eth-Trunk interface on S series switches
For S series switches (except the S1700), you can configure an IP address for an Eth-Trunk interface as follows: [HUAWEI]interface Eth-Trunk 10 [HUAWEI-Eth-Trunk10]undo portswitch [HUAWEI-Eth-Trunk10]ip address 10.2.2.2 24

In which views can IPSG be enabled on S series switches
IPSG can be enabled on an S series switch (except the S1700) in an interface or a VLAN view. Interface views include the Ethernet interface view, GE interface view, 40GE interface view, XGE interface view, 100GE interface view, Eth-Trunk interface view, and port group view. Example 1: Enable IPSG in the GE0/0/1 view. [HUAWEI] interface gigabitethernet 0/0/1 [HUAWEI-GigabitEthernet0/0/1] ip source check user-bind enable Example 2: Enable IPSG in the VLAN 100 view. [HUAWEI] vlan 100 [HUAWEI-vlan100] ip source check user-bind enable

How do I configure the link type of an Eth-Trunk interface to Hybrid on S series switches
For S series switches (except the S1700), use the following method to configure the link type of an Eth-Trunk interface to Hybrid: # Configure Eth-Trunk 1 to allow packets from VLAN 10 and VLAN 20 to pass through. [HUAWEI] interface eth-trunk 1 [HUAWEI-Eth-Trunk1] port link-type hybrid [HUAWEI-Eth-Trunk1] port hybrid tagged vlan 10 20 [HUAWEI-Eth-Trunk1] quit

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top