Common configuration commands of S series switches for Ethernet features of other vendors

0

The followings are common configuration commands of S series switches (except the S1700) for Ethernet features of other vendors:
1. Configure the STP mode.
[HUAWEI] stp mode stp
2. Disable MAC address learning
- Disable MAC address learning on an interface.
[HUAWEI] interface gigabitethernet 1/0/1
[HUAWEI-GigabitEthernet1/0/1] mac-address learning disable
- Disable MAC address learning on a VLAN
[HUAWEI] vlan 2
[HUAWEI-vlan2] mac-address learning disable

3. Configure a blackhole MAC address.
[HUAWEI] vlan batch 5
[HUAWEI] mac-address blackhole 0004-0004-0004 vlan 5

For other configuration commands, refer to Common Operation Guide.

Other related questions:
Whether sFlow for S series switches is compatible with protocols of other vendors
NetFlow is other vendor's proprietary protocol. sFlow for S series switches is not compatible with NetFlow.

Can S switch learn the vlan automatically from other vendor's device ?
sorry, they can not

Common commands for querying device information on S series switches
For S series switches (except the S1700), you can find the common commands to view the device information in the section" Displaying the Device Status" in "Configuration Guide �?Device Management". For example, for the S12700 V200R007, you can refer to the section " Displaying the Device Status" in S12700 V200R007C00 Configuration Guide - Device Management.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top