Does the S6700 on which vlan-mapping and vlan-stacking are configured support remark 8021p

0

The S6700 does not support remark 8021p.

Other related questions:
Which VLAN does the interface enabled with VLAN mapping or QinQ obtain through MAC address learning
The VLAN mapping or QinQ implementation is prior to the MAC address learning. Thus, after the VLAN mapping or QinQ implementation, the interface obtains the outer VLAN through MAC address learning.

Which vlan will be based on to leran MAC when we confgured vlan-mapping ?
The Switch will learn MAC address based on the Vlan ID after Mapping. Because vlan mapping processing is befroe MAC learnning.

What type of interfaces can VLANs be configured
Currently, the following Ethernet interface types are defined on the AR router: 1. Layer 2 Ethernet interfaces: They are physical interfaces working at the data link layer. These interfaces cannot be configured with IP addresses, but can forward received packets at Layer 2 or be added to VLANs to forward packets at Layer 3 through corresponding VLANIF interfaces. 2. Layer 3 Ethernet Interfaces: They are physical interfaces working at the network layer. These interfaces cannot be added to VLANs, but can be configured with IP addresses and forward received packets at Layer 3.

Support for MPLS and requirement for a license on an S series switch
Support for MPLS VPN on S series switches (except the S1700) is as follows: - Switch model - Minimum version supporting MPLS VPN - S5710EI - V200R002 (The S5710EI is unavailable in V200R006 and later versions.) - S5700HI - V200R001 (The S5700HI is unavailable in V200R006 and later versions.) - S5710HI - V200R003 (The S5710HI is unavailable in V200R006 and later versions.) - S5720HI - V200R007C10 - S6700EI - V200R005 (The S6700EI is unavailable in V200R006 and later versions.) - S6720EI - V200R008 - S6720S-EI - V200R009 - S7703, S7706, and S7712 - V100R003 - S9700 - V200R001 - S12704 - V200R008 - S12708 and S12712 - V200R005 - S12710 - V200R010 - S9303, S9306, and S9312 - V100R002 - S9310 - V200R010 - S9300E - V200R002 Note: For a modular switch, a license is required for MPLS. For a fixed switch, no license is required for MPLS.

Why inner tags are removed when the VLAN-Mapping transparently transmits double-tagged packets after the VLAN-Stacking is configured
In S2752, S3752, S5752EI V100R003, and subsequent versions, after the VLAN-Stacking and VLAN-Mapping are configured on outbound ports, inner tags are removed when cross-chip double-tagged packets are transparently transmitted, interrupting services. During the configuration, set the two ports for forwarding to the same chip.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top