Does the switch support traffic statistics on the VLANIF port

0

In V100R005 and later versions, the statistic enable can be configured in the VLAN view corresponding to the VLANIF port to make the switch support traffic statistics. However, the statistics can be collected only on packets but not bytes.

You can also query traffic statistics in MIB objects ifInOctets and ifOutOctets.

Other related questions:
Does an AR support IP traffic statistics
AR routers support IP traffic statistics collection.

Does the switch support bandwidth statistics on the Eth-Trunk port
Bandwidth statistics include the InUti and OutUti parameters in the port information. Switches of V100R006 and later versions support bandwidth statistics collection for the Eth-Trunk interface. The values of InUti and OutUti are 0 in versions earlier than V100R006. The following is an example: display interface brief InUti/OutUti: input utility/output utility Interface PHY Protocol InUti OutUti inErrors outErrors Eth-Trunk1 up up 0% 0% 0 0 GigabitEthernet0/0/2 up up 21% 42% 634 0 GigabitEthernet0/0/3 up up 36% 37% 979 0 GigabitEthernet0/0/4 up up 31% 42% 978 0

Can the S Switch support traffic statistic for Vlan interface ?
1. All the chassis Switch can support traffic statistic. 2. S1720、S2720、S2750、S5700LI、S5700S-LI and S5710-X-LI can not support, other box Switch can support. we need configure statistic enable in vlan view for S5700SI、S5720SI、S5720S-SI.

Does a VLANIF interface on an S series switch support packet filtering configured using the traffic-policy command
You cannot run the traffic-filter command to configure packet filtering on a VLANIF interface of S series switches (except the S1700). You can run the traffic-filter command in the following interface views: - Ethernet interface view, such as the GE interface view and the XGE interface view. The specific Ethernet interface view is determined by the switch and card models. - Logical interface view, including the Eth-Trunk interface view and the port group view, but not including the VLANIF interface view.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top