Since which version does the S6700EI support GE copper transceiver modules

10

XGE optical interfaces on the S6700EI support GE copper transceiver modules in V200R001C01 and later versions.

Other related questions:
Whether an S series switch supports VRRP
S600-E series switches do not support VRRP. The following lists S series switch product support for VRRP excluding S1700: - S1720: Not supported by S1720GFR; supported by S1720GW-E and S1720GWR-E - S2700: Not supported. - S3700: Not supported by SI series; supported by EI and HI series - S5700: Not supported by SI series; supported by S5720-LI and S5720S-LI, but not supported by other LI series; supported by EI and HI series - S6700: Supported - S7700: Supported - S9700: Supported - S9300: Supported - S12700: Supported

Whether S series switches support IPSG
All S series switches except the following support IPSG: S1700 switches S2700-SI switches W series cards of S7700, S9700, and S1270 switches S9300 of earlier versions than V100R002 For switches that do not support IPSG, you can run the mac-address static vlan command to configure static MAC addresses and run the mac-address learning disable command to disable MAC address learning on interfaces to realize a function similar to IPSG.

Since which version do S series switches support the command to disable the NTP service function
You can run the ntp-service disable command on an S series switch (except the S1700) in V200R001 or a later version to disable the NTP service function.

Does the GE optical LPU of the S12700 support 100M optical module
The S12700's GE optical LPU supports both 100M optical modules and 1000M optical modules. When a 100M optical module is used, you must run the speed 100 command on the interface to set the interface rate to 100 Mbit/s. When using a GE optical module, an interface works at 1000 Mbit/s by default. If auto-negotiation is enabled on the interface, the interface speed cannot be set to 100 Mbit/s. If auto-negotiation is disabled, you can run the speed 100 command to set the interface speed to 100 Mbit/s. When two optical interfaces are interconnected, they must use the same type of optical module.

In which versions is SNMP for S series switches available
SNMP for S series switches is available in v1, v2c, and v3.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top