Can an IP address be directly assigned to a physical interface

2

An MEth management port is a Layer 3 interface. You can directly configure an IP address for the interface.

To configure an IP address for a service interface, configure a VLANIF virtual interface, and assign an IP address to the VLANIF interface. Example:

system-view
[HUAWEI] vlan 10
[HUAWEI-vlan10] quit
[HUAWEI] interface vlanif 10
[HUAWEI-Vlanif10] ip address 192.168.1.10 24 In V200R005C00 and later versions, run the undo portswitch command to change the working mode of Ethernet interfaces from Layer 2 mode to Layer 3 mode. Ethernet interfaces working at Layer 3 support IP address configuration.

Other related questions:
Can the TE40 be assigned a dynamic IP address?
Dynamic IP addresses can be configured for TE series endpoints, but must register with the GK or SIP server.

Can the DHCP server assign IP addresses in ascending order
An S series switch used as the DHCP server assigns IP addresses to DHCP clients in descending order by default, which cannot be adjusted.

How to assign fixed IP addresses to terminals through the interface address pool on the AR
Reserve fixed IP addresses that will be assigned to terminals and manually assign them to terminals.

IP address planning of a storage device
Service network ports on the same controller must reside in different network segments and also must reside in different network segments from the management network port of the controller.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top