How do I configure SVF on an S series switch

3

To configure SVF on an S series switch (except the S1700), click Configuration Guide - Device Management-SVF Configuration .

Other related questions:
How do I delete an AS from an SVF system on an S series switch
For S series switches (except the S1700), run the undo as { all | name as-name } command to delete an AS from an SVF system. If an AS is bound to the instance of a performance management statistics task, run the undo binding instance-type instance-type { all | instance instance-name &<1-5> } command to delete the bound instance, and then delete the AS from the SVF system.

SNMP configuration on S series switch
S series switches (except S1700 switches) support three SNMP versions: SNMPv1, SNMPv2c, and SNMPv3. SNMPv1 and SNMPv2c use community names for authentication, resulting in low security, whereas SNMPv3 uses authentication and encryption technologies to enhance security. The following uses SNMPv2c configuration as an example: [HUAWEI] snmp-agent //Enable SNMP. [HUAWEI] snmp-agent sys-info version v2c //Set the SNMP version to SNMPv2c. [HUAWEI] snmp-agent community write adminnms01 //Set the SNMP write community name. For common SNMP configuration information, see "Common SNMP Operations" in S1720&S2700&S3700&S5700&S6700&S7700&S9700 Series Switches Common Operation Guide. For typical SNMP configuration examples, see "Typical SNMP Configuration" in "Typical Network Management and Monitoring Configuration" of S1720&S2700&S3700&S5700&S6700&S7700&S9700 Typical Configuration Examples. Common configuration and typical configuration examples for S9300 and S12700 series switches are the same as those for Sx700 series switches. The Sx700 series switches are used as an example here.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top