How many IP addresses can be configured on the VT interface when an S series switch functions as a PPPoE server

2

Sorry, I can't answer this question. For details about product specifications and performance, Kindly click Live Chat service for support.

Other related questions:
Does VLANIF interfaces of the AR router support the PPPoE client
The PPPoE client cannot be configured on a VLANIF interface, but the PPPoE server can be configured on the VLANIF interface.

Number of secondary IP addresses supported by S series switches
For S series switches (except the S1700): In V100R006 and later versions, each interface of an S series fixed switch supports up to eight secondary IP addresses. In V100R003 and later versions, each interface of an S series modular switch supports up to 255 secondary IP addresses.

Types of packets checked by S series switches with IPSG enabled
For S series switches (except S1700 switches), IPSG takes effect only for IP packets (except DHCP packets) but not for packets of other types such as ARP or PPPoE. With IPSG enabled, an S series switch checks only IPv4 packets in versions earlier than V200R001 and checks all IPv4 and IPv6 packets in V200R001 and later versions.

Can an S series switch function as the NTP server
The following is an example of configuring the NTP server function in broadcast mode. [HUAWEI] ntp-service refclock-master 3 //Configure the local clock as the NTP master clock. [HUAWEI] undo ntp-service server disable //Enable the IPv4 NTP server function. [HUAWEI] interface vlanif 100 [HUAWEI-Vlanif100] ip address 10.1.1.1 24 //Configure an IP address for the server. [HUAWEI-Vlanif100] ntp-service broadcast-server //Configure the local switch as the NTP broadcast server.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top