Can S series switches enter the sleep mode

1

S series modular switches cannot enter the sleep mode.
Some models of S series fixed switches can enter the sleep mode. The following lists switch models that support the sleep mode:
1. S5710-X-LI series switches
2. S5700S-28P-LI-AC, S5700S-52P-LI-AC, S5700S-28X-LI-AC, and S5700S-52X-LI-AC among the S5700S-LI series switches
3. S5700-28P-LI-AC, S5700-28TP-LI-AC, S5700-28P-LI-DC, S5700-52P-LI-AC, S5700-52P-LI-DC, S5700-28X-LI-AC, S5700-28X-LI-DC, S5700-52X-LI-AC, S5700-52X-LI-DC, and S5701-28X-LI-AC among the S5700LI series switches
4. S5720-28P-SI-AC, S5720-28X-SI-AC, S5720-28X-SI-DC, S5720-28X-SI-24S-AC, S5720-28X-SI-24S-DC, S5720-52P-SI-AC, S5720-52X-SI-DC, and S5720-52X-SI-AC among the S5720SI series switches
5. S5720S-28P-SI-AC, S5720S-28X-SI-AC, S5720S-28X-SI-DC, S5720S-52P-SI-AC, S5720S-52X-SI-DC, and S5720S-52X-SI-AC among the S5720S-SI series switches

Other related questions:
Can S series switches enter the sleep mode
S series modular switches cannot enter the sleep mode. Some models of S series fixed switches can enter the sleep mode. The following lists switch models that support the sleep mode: 1. S5710-X-LI series switches 2. S5700S-28P-LI-AC, S5700S-52P-LI-AC, S5700S-28X-LI-AC, and S5700S-52X-LI-AC among the S5700S-LI series switches 3. S5700-28P-LI-AC, S5700-28TP-LI-AC, S5700-28P-LI-DC, S5700-52P-LI-AC, S5700-52P-LI-DC, S5700-28X-LI-AC, S5700-28X-LI-DC, S5700-52X-LI-AC, S5700-52X-LI-DC, and S5701-28X-LI-AC among the S5700LI series switches 4. S5720-28P-SI-AC, S5720-28X-SI-AC, S5720-28X-SI-DC, S5720-28X-SI-24S-AC, S5720-28X-SI-24S-DC, S5720-52P-SI-AC, S5720-52X-SI-DC, and S5720-52X-SI-AC among the S5720SI series switches 5. S5720S-28P-SI-AC, S5720S-28X-SI-AC, S5720S-28X-SI-DC, S5720S-52P-SI-AC, S5720S-52X-SI-DC, and S5720S-52X-SI-AC among the S5720S-SI series switches

How do I put the TE series endpoint in sleep mode?
To set the sleep and wake-up modes for a TE series endpoint, perform the following operations: On the web interface, choose System Settings > General > Power management > Enter sleep mode and set the sleep mode. When the endpoint meets the conditions for entering the sleep mode, it automatically enters the sleep mode. If Enter sleep mode is set to Never, the endpoint will never go to sleep. The default value is After 10 min. The endpoint wakes up from the sleep mode once any operation is performed on it. For example, the endpoint wakes up for an upgrade, the connection to a video source, the forwarding of infrared signals, an incoming call, an operation on the remote control/touch panel, or access to the endpoint web interface. To put the TE series endpoint in sleep mode, press the Power button on the remote control and choose Sleep.

How do I set the sleep mode for a TE series endpoint?
To set the sleep mode for a TE series endpoint and wakes up the endpoint from the sleep mode, perform the following operations: On the web interface of the endpoint, choose System Settings > General > Power management. Enter sleep mode: period after which an endpoint enters the sleep mode (when the sleep conditions are met) if no operation is performed. If this parameter is set to Never, the endpoint will never go to sleep automatically. Default value: 10 minutes The endpoint wakes up from sleep mode once any operation is performed on it. For example, the endpoint wakes up for an incoming call, an operation on the remote control, or access to the endpoint web interface. To directly place the endpoint in sleep mode, press the power off key on the remote control and select the sleep option.

How can I put the DP300 in sleep mode?
Put the DP300 in sleep mode in either of the following ways: 1. Tap the power button in the lower right corner of the display and choose to put the DP300 in sleep mode. 2. Press the power button on the remote control and choose to put the DP300 in sleep mode.

Can Telnet users log in to S series switches without entering the password when the authentication mode for the administrator domain is none
When the authentication mode for the administrator domain on an S series switch (except the S1700 switch) is set to none and the login authentication mode is set to AAA authentication in the user interface view, Telnet users cannot log in to the switch. To enable Telnet users to log in to the switch without authentication, run the following command: [HUAWEI] user-interface vty 0 [HUAWEI-ui-vty0] authentication-mode none

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top