Homepage FAQ Switch

How to enable or disable display of debugging, log, and alarm information sent from the information center

234

The terminal monitor, terminal debugging, terminal logging, and terminal trapping commands enable a terminal to display debugging, log, and alarm information sent from the information center.

The undo terminal monitor, undo terminal debugging, undo terminal logging, and undo terminal trapping commands disable a terminal from displaying debugging, log, and alarm information sent from the information center.

Other related questions:

How do I disable the information center

Run the undo info-center enable command in the system view to disable the information center. After the undo info-center enable command is executed, logs including logs generated by the undo info-center enable command, traps, and debugging messages are not recorded.

How to configure a switch to send debugging information to the log server

To configure a switch to send debugging information to the log server, run the following commands in the system view. [HUAWEI] info-center source default channel 2 debug state on [HUAWEI] info-center loghost x.x.x.x By default, a switch sends only logs and traps to the log server.

How to enable and disable the information center

By default, the information center is enabled. You can run the following commands in the system view to enable or disable the information center. Disable the information center: system-view [HUAWEI] undo info-center enable After the information center is disabled, the log function becomes unavailable. Enable the information center: [HUAWEI] info-center enable

How to enable or disable terminal information display on a CE series switch

By default, a terminal displays alarm or log information on a device when you log in to a device through a console port. You can run a command to determine whether to allow a terminal to display the information.

Disable information display.
<HUAWEI> undo terminal alarm //Disable the alarm information display function on the terminal.
<HUAWEI> undo terminal logging //Disable the log information display function on the terminal.
<HUAWEI> undo terminal debugging //Disable the debugging information display on the terminal.
<HUAWEI> undo terminal monitor //Disable the monitoring information display on the terminal.
After the undo terminal monitor command is executed, all prompt messages are not displayed, including alarms, logs, and debugging information.

Enable information display.
<HUAWEI> terminal monitor //Enable the monitoring information display on the terminal.
<HUAWEI> terminal alarm //Enable the alarm information display function on the terminal.
<HUAWEI> terminal logging //Enable the log information display function on the terminal.
<HUAWEI> terminal debugging //Enable the debugging information display on the terminal.

If you have more questions, you can seek help from following ways:

To WeiKnow To Live Chat

Enterprise

Consumer

Corporate

Carriers

How to enable or disable display of debugging, log, and alarm information sent from the information center

Other related questions:

If you have more questions, you can seek help from following ways: