Which types of interfaces can be used for FTP file transfer on S series switches

20

For S series switches (except S1700 switches), FTP file transfer can be performed between a client and a server when the following conditions are met:
1. The FTP client software has been installed on the client.
2. The client and server can successfully ping each other.
When the preceding conditions are met, FTP file transfer can be performed between interfaces of any type, such as Eth-Trunk interfaces and management interfaces.

Other related questions:
What types of interfaces can be used for FTP file transfer
FTP file transfer can be performed between a client and a server as long as the FTP client software has been installed on the client and the client can successfully ping the server. When the preceding requirements are met, FTP file transfer can be performed between interfaces of any type, such as Eth-Trunk interfaces and management interfaces.

Why is no file found in FTP transfer on an S series switch
For S series switches (except S1700 switches), the possible causes are as follows: 1. The file transferred does not exist. 2. The file name is incorrect. 3. The file name contains spaces. Huawei devices do not support file names containing spaces. If a file name contains spaces, the device reads only the part before the spaces; therefore, an error occurs in file transfer and no file is found.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top