How to connect the uplink port of the S2700 switch?


The S2700 uplink interface is divided into GE optical interfaces or GE's combo interfaces. The interfaces are connected to the upper network devices. If the GE optical interface or combo optical port to be supporting the optical modules and fiber, if it is combo electric port,it need cable.

Other related questions:
What types of uplink ports does the AR200 series provide
The AR200 series provides the following types of uplink ports: FE, ADSL, G.SHDSL, 3G (WCDMA).

Rate of uplink interfaces on S series fixed switches
The S2700 and S3700 provide GE uplink interfaces. The S1720, S600, and S5700 provide GE or 10GE uplink interfaces, depending on the model. The S6700EI provides 10GE uplink and downlink interfaces. The S6720EI and S6720S-EI provide 40GE uplink interfaces.

How to delete an observing port on S series switches
For S series switches (except S1700 switches), perform the following configurations to delete an observing port: 1. Delete the binding between the observing port and mirrored port. - Port mirroring [HUAWEI] interface gigabitethernet x/x/x [HUAWEI-GigabitEthernetx/x/x] undo port-mirroring to observe-port x inbound/outbound/both [HUAWEI-GigabitEthernetx/x/x] quit - MQC-based traffic mirroring a. Delete the traffic policy applied to the system, a VLAN, or an interface. In the following example, a traffic policy applied to an interface is deleted. [HUAWEI] interface gigabitethernet x/x/x [HUAWEI-GigabitEthernetx/x/x] undo traffic-policy inbound/outbound [HUAWEI-GigabitEthernetx/x/x] quit b. Delete the traffic policy in the system view. [HUAWEI] undo traffic policy xxx c. Delete the traffic behavior containing the traffic mirroring action in the system view. [HUAWEI] undo traffic behavior xxx - ACL-based traffic mirroring Delete ACL-based traffic mirroring configured in the system or interface view. In the following example, ACL-based traffic mirroring is deleted in the system view. [HUAWEI] interface gigabitethernet x/x/x [HUAWEI-GigabitEthernetx/x/x] undo traffic-mirror inbound acl xxx [HUAWEI-GigabitEthernetx/x/x] quit - VLAN mirroring [HUAWEI] vlan xxx [HUAWEI-vlanxxx] undo mirroring inbound [HUAWEI-vlanxxx] quit - MAC address mirroring [HUAWEI] vlan xxx [HUAWEI-vlanxxx] undo mac-mirroring xxx inbound [HUAWEI-vlanxxx] quit 2. Delete the observing port configuration in the system view. [HUAWEI] undo observe-port x

Can two network port of IAD1224 be the uplink network port
Two network port of IAD1224 can not be the uplink network port.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top