Does the S12700 support the adjustment of fan speed

2

The S12700 series switches support the adjustment of fan speed. The speed of operating fans can be automatically adjusted based on the temperature inside the chassis. In addition, you can also manually change the fan speed using the set fan-speed command. You can run the display fan command to check the status of fans.

Other related questions:
Does the S7700&S9700 support the adjustment of fan speed
The S7700&S9700 series switches support the adjustment of fan speed. The speed of operating fans can be automatically adjusted based on the temperature inside the chassis. In addition, you can also manually change the fan speed using the set fan-speed command. You can run the display fan command to check the status of fans.

Adjusting the fan speed of the USG6000
To adjust the fan speed, run the test fan-speed fan-id fan-speed command in the diagnose view. This command involves two parameters. fan-id specifies the fan ID, which can be 0, 1, and 2. 0 and 1 specify the ID of the corresponding fan, and 2 indicates all fans. fan-speed specifies the fan speed, which is an integer ranging from 0 to 4 or 0 to 7, according to the model. A larger value indicates a faster fan speed. The maximum value indicates that the fan runs at the full speed.

Method used to adjust the fan speed
In the NE Explorer, choose Configuration > Fan Attribute. In the right-hand pane, select Adjustable Speed in Fan Speed Mode. Then set Fan Speed Level as required. You are advised to select Auto Speed in Fan Speed Mode.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top