Is there any interference when the Gigabit fiber cable and 10000 V high-tension electrical wire are placed in a pipe

18

Optical signals are not influenced by the high-tension electrical signals even if flanges are used to connect the fiber parts of the cable.

Other related questions:
How to connect AR routers to other devices using V.35 cables
1SA/2SA interface cards (1/2-interface synchronous/asynchronous WAN interface cards) and 8SA interface cards (8-interface synchronous/asynchronous WAN interface cards) support SA cables. Before selecting SA cables, confirm the type of the peer device (such as synchronous/asynchronous mode and DTE/DCE mode) and the signal standard, baud rate, and synchronization clock required by the access device. V.35 DTE cables are connected as follows: ? Cables with one connector (DB28) are connected to SA cards. ? Cables with two connecters are connected to different devices as follows based on the feature of lines: - If DDN lines are used in WAN, connect the cables to the interfaces of CSU/DSU. - If dial-up lines are used in WAN, connect the cables to the serial interfaces of analog modems. V.35 DCE cables are connected as follows: ? Cables with one connector (DB28) are connected to SA cards. ? Cables with two connecters are connected to different devices as follows based on the feature of lines: - If DDN lines are used in WAN, connect the cables to the interfaces of CSU/DSU. - If dial-up lines are used in WAN, connect the cables to the serial interfaces of analog modems.

What is the length of uc-iad high density cable
10 meters

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top