Card replacement on S series fixed switches

15

Before replacing a card on an S series fixed switch, check whether the card is supported by the switch. For the mapping between cards and switches, see section "Cards" in the hardware description of a specified switch.
For the hardware description of S5700 switches, see S5700 Hardware Description.
For the hardware description of S6700 switches, see S6700 Hardware Description.
You can use Hardware Query Tool to query the card models supported by specified switches.

Other related questions:
Cards supported by S series fixed switches
The following S series fixed switches support cards: S3700-HI, S5710-C-LI, S5700-SI (except the S5700-26X-SI-12S-AC), S5700-EI, S5710-EI, S5720-C-EI, S5720-PC-EI, S5700-HI, S5710-HI, S5720-HI, and S6720-EI series switches. Cards must be installed on corresponding switches based on the mapping between them. If a card is installed on an incompatible switch, the card cannot register. You can use Hardware Query Tool to query the card models supported by specified switches.

Are cards of S series fixed switches hot swappable
Subcards on S5700-SI and S5700-EI fixed switches are not hot swappable. Subcards on S3700-HI, S5700-HI, S5710-EI, S5720-EI, S5710-HI, S5720-HI, and S6720-EI switches are hot swappable. You can click Hardware Query Tool to check whether a subcard is hot swappable or not.

Card installation and replacement on S series switches
For card installation and replacement of switches, see the Hardware Installation and Maintenance Guide. For the S9300 and S9300E, see S9300&S9300E Hardware Installation and Maintenance Guide. For the S7700 and S9700, see S7700&S9700 Hardware Installation and Maintenance Guide. For the S12700, see S12700 Hardware Installation and Maintenance Guide.

Whether cards of S series fixed switches support copper modules
The following cards of S series fixed switches support GE copper modules: - ES5D000G4S01 cards (Applicable to S5700-EI series switches. After a GE copper module is installed, the link can go Up. However, you cannot run corresponding commands to configure the rate, duplex mode, auto-negotiation, MDI, flow control, and virtual cable test on the link.) - ES5D00G4SA01 cards (Applicable to S5700-SI and S5710-LI series switches. After a GE copper module is installed, the link can go Up. However, you cannot run corresponding commands to configure the rate, duplex mode, auto-negotiation, MDI, flow control, and virtual cable test on the link.) - ES5D00G4SC00 cards (Applicable to S5700-HI series switches. After a GE copper module is installed, the link can go Up. However, you cannot run corresponding commands to configure the rate, duplex mode, auto-negotiation, MDI, flow control, and virtual cable test on the link.) - ES5D000X2S00 and ES5D000X4S01 cards (Supported by V200R002C00 and later versions, and applicable to S5700-SI series switches.) - ES5D00X2SA00 and ES5D00X4SA00 cards (Supported by V200R002C00 and later versions, and applicable to S5700-HI series switches.) - ES5D21X02S00 cards (Supported by V200R002C00 and later versions, and applicable to S5700-EI series switches.) You can use Hardware Query Tool to query the module types supported by specified cards.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top