Whether cards of S series fixed switches support copper modules

0

The following cards of S series fixed switches support GE copper modules:
- ES5D000G4S01 cards (Applicable to S5700-EI series switches. After a GE copper module is installed, the link can go Up. However, you cannot run corresponding commands to configure the rate, duplex mode, auto-negotiation, MDI, flow control, and virtual cable test on the link.)
- ES5D00G4SA01 cards (Applicable to S5700-SI and S5710-LI series switches. After a GE copper module is installed, the link can go Up. However, you cannot run corresponding commands to configure the rate, duplex mode, auto-negotiation, MDI, flow control, and virtual cable test on the link.)
- ES5D00G4SC00 cards (Applicable to S5700-HI series switches. After a GE copper module is installed, the link can go Up. However, you cannot run corresponding commands to configure the rate, duplex mode, auto-negotiation, MDI, flow control, and virtual cable test on the link.)
- ES5D000X2S00 and ES5D000X4S01 cards (Supported by V200R002C00 and later versions, and applicable to S5700-SI series switches.)
- ES5D00X2SA00 and ES5D00X4SA00 cards (Supported by V200R002C00 and later versions, and applicable to S5700-HI series switches.)
- ES5D21X02S00 cards (Supported by V200R002C00 and later versions, and applicable to S5700-EI series switches.)
You can use Hardware Query Tool to query the module types supported by specified cards.

Other related questions:
Cards supported by S series fixed switches
The following S series fixed switches support cards: S3700-HI, S5710-C-LI, S5700-SI (except the S5700-26X-SI-12S-AC), S5700-EI, S5710-EI, S5720-C-EI, S5720-PC-EI, S5700-HI, S5710-HI, S5720-HI, and S6720-EI series switches. Cards must be installed on corresponding switches based on the mapping between them. If a card is installed on an incompatible switch, the card cannot register. You can use Hardware Query Tool to query the card models supported by specified switches.

Modules supported by cards on S series switches
To query modules supported by cards on S series switches, you can use Hardware Query Tool.

Are cards of S series fixed switches hot swappable
Subcards on S5700-SI and S5700-EI fixed switches are not hot swappable. Subcards on S3700-HI, S5700-HI, S5710-EI, S5720-EI, S5710-HI, S5720-HI, and S6720-EI switches are hot swappable. You can click Hardware Query Tool to check whether a subcard is hot swappable or not.

Whether front cards and rear stack cards can be used together on S series fixed switches
S5700-EI, S5710-LI, and S5700-C-SI series fixed switches have front and rear card slots. Font card slots can have 2-port or 4-port service interface cards installed. Rear card slots can have stack cards or extended channel cards installed. The rules are as follows: -- A 4-port ES5D000G4S01 or ES5D00G4SA01 GE front card and a 4-port ES5D000X4S01 10GE front card must be used with an ES5D00ETPB00 rear extended channel card; otherwise, only two ports on the 4-port front card can work. -- If an ES5D000G4S01 or ES5D00G4SA01 front card is used with an ES5D00ETPC00 rear stack card on an S5700-EI, S5700-SI, or S5710-C-LI switch, only the first two ports on the front card can work when the switch is working normally. If the ES5D000X4S01 front card is used, only ports 1 and 3 are available. --The ES5D00ETPB00 card used with the ES5D000X4S01 front card must have a PCB of version C. -- The S5700-EI switch that uses the ES5D000X4S01 front card must have a PCB of version B or later (version C on S5700-52C-EI). You can run the display version command to check the PCB version of a switch. For details about cards, see the Hardware Description. For the hardware description of S5700 switches, see S5700 Hardware Description. For the hardware description of S6700 switches, see S6700 Hardware Description.

Link aggregation support on S series fixed switches
S series fixed switches (except the S1700) support the link aggregation function. For details about link aggregation support on the fixed switches, see the "Ethernet Switching - Link Aggregation" in the S1720&S2700&S3700&S5700&S6700 Product Use Precautions.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top