Modules supported by cards on S series switches

19

To query modules supported by cards on S series switches, you can use Hardware Query Tool.

Other related questions:
Whether cards of S series fixed switches support copper modules
The following cards of S series fixed switches support GE copper modules: - ES5D000G4S01 cards (Applicable to S5700-EI series switches. After a GE copper module is installed, the link can go Up. However, you cannot run corresponding commands to configure the rate, duplex mode, auto-negotiation, MDI, flow control, and virtual cable test on the link.) - ES5D00G4SA01 cards (Applicable to S5700-SI and S5710-LI series switches. After a GE copper module is installed, the link can go Up. However, you cannot run corresponding commands to configure the rate, duplex mode, auto-negotiation, MDI, flow control, and virtual cable test on the link.) - ES5D00G4SC00 cards (Applicable to S5700-HI series switches. After a GE copper module is installed, the link can go Up. However, you cannot run corresponding commands to configure the rate, duplex mode, auto-negotiation, MDI, flow control, and virtual cable test on the link.) - ES5D000X2S00 and ES5D000X4S01 cards (Supported by V200R002C00 and later versions, and applicable to S5700-SI series switches.) - ES5D00X2SA00 and ES5D00X4SA00 cards (Supported by V200R002C00 and later versions, and applicable to S5700-HI series switches.) - ES5D21X02S00 cards (Supported by V200R002C00 and later versions, and applicable to S5700-EI series switches.) You can use Hardware Query Tool to query the module types supported by specified cards.

Card models supported by S series switches
For card models supported by S series switches, you can use Hardware Query Tool to query details or see "Cards" in the Hardware Description. For the hardware description of the S9300 and S9300E, see S9300&S9300E Hardware Description. For the hardware description of the S7700, see S7700 Hardware Description. For the hardware description of the S9700, see S9700 Hardware Description. For the hardware description of the S12700, see S12700 Hardware Description.

Cards supported by S series fixed switches
The following S series fixed switches support cards: S3700-HI, S5710-C-LI, S5700-SI (except the S5700-26X-SI-12S-AC), S5700-EI, S5710-EI, S5720-C-EI, S5720-PC-EI, S5700-HI, S5710-HI, S5720-HI, and S6720-EI series switches. Cards must be installed on corresponding switches based on the mapping between them. If a card is installed on an incompatible switch, the card cannot register. You can use Hardware Query Tool to query the card models supported by specified switches.

Do S series switches support EPON cards
No.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top