Functions of the RESET button on S series switches

5

The RESET button on the MPU of a modular switch is used to reset cards.
The RESET button on a fixed switch resets the switch or restores factory settings.

Other related questions:
Functions of the MODE button on S series switches
The MODE button on S series switches (except the S1700) has the following functions: - For versions earlier than V200R006C10, you can change the indicator to stack mode and show the stack ID. - For V200R006C10 and later versions, you can hold down the MODE button for 6 seconds to start the web initial login mode.

Function of the RESET button on the system control board of the OSN 6800
The RESET button resets the system control board.

Does an S series switch have a Reset button to restore factory settings
Only the S1700 web-managed switches and S1720 switches have the Reset button to restore factory settings.

What are the differences between the RESET button and the RST button
Solution: AR100, AR110, AR120, AR150, AR160, AR200, and the corresponding S series routers are equipped with a RESET button to reset the device. It can be used in two methods: 1. Press and hold the button to restore the factory settings 2. Press the button to reset the system. AR1200, AR2200, AR3200, AR3600, and the corresponding S series routers are equipped with an RST button. It can be used only to reset the device.

Whether the RESET button on the TN16XCH or TN16UXCM board implements a warm reset or a cold reset on the board
A warm reset.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top