Do SA series cards support GE interfaces

15

Among SA series cards, ports on the LE0MG24SA, LE0MG24CA, ES0D0G24SA00, and ES0D0G24CA00 can work at 1000 Mbit/s, and ports on other SA cards only transmit and receive services at 10 Gbit/s and cannot work at 1000 Mbit/s.
You can use Hardware Query Tool to query the port rate of specified cards.

Other related questions:
Do E1 and SA cards support inter-board MP
In V200R005 and earlier versions: The device does not support inter-board MP. In V200R006 and later versions: The device supports inter-board MP only on interface cards of the same type. The 1STM1, 1STM4, 4STM1, 1CPOS-155M, and 1CPOS-155M-W interface cards do not support inter-board MP. The 1SA/2SA/8SA, 1E1/T1-M, 2E1/T1-M, 4E1/T1-M, 8E1/T1-M, 1E3/CE3/T3/CT3, 1E1/T1-F, 2E1/T1-F, 4E1/T1-F, 8E1/T1-F, and 1BST interface cards support inter-board MP.

Do ports on a CE-L24XS-EC card support GE optical modules
Yes. Ports on a CE-L24XS-EC card support GE optical modules. A CE-L24XS-EC card provides packet processing and traffic management on twenty-four 10GE optical ports. - When the 10GE ports work in 10GE mode, they support SFP+ 10GBASE-SR/LR/ER/ZR/LRM/USR optical modules, and can work with 10GE Twinax copper cables or AOC cables. - When the 10GE ports work in GE mode, they support SFP 1000BASE-X optical modules and 1000BASE-T copper modules. When using a 1000BASE-T copper module, a port supports 10M/100M/1000M auto-sensing.

Why is the GE interface on the 8FE1GE interface card not seen in interface information after the interface card register successfully

Run the display interface brief command to view the interface information:

<Huawei> display interface brief
InUti/OutUti: input utility/output utility
Interface                   PHY      Protocol    InUti    OutUti      inErrors     outErrors
Cellular0/0/0               down      down        0%        0%           0             0    
Cellular0/0/1               down      down        0%        0%           0             0    
Ethernet5/0/0         down      down        0%        0%           0             0    
Ethernet5/0/1         up          up        0%        0%           0             0    
Ethernet5/0/2         down      down        0%        0%           0             0    
Ethernet5/0/3         down      down        0%        0%           0             0    
Ethernet5/0/4         up          up      0.01%     0.01%          0             0    
Ethernet5/0/5         down      down        0%        0%           0             0    
Ethernet5/0/6         down      down        0%        0%           0             0    
Ethernet5/0/7         down      down        0%        0%           0             0    
GigabitEthernet0/0/0        down      down        0%        0%           0             0    
GigabitEthernet0/0/1        down      down        0%        0%           0             0    
GigabitEthernet0/0/2        down      down        0%        0%           0             0    
GigabitEthernet5/0/0  down      down        0%        0%           0             0    

You can see from the command output that the GE interface on the 8FE1GE interface card is displayed after the other GE interfaces on the router, not following the eight FE interfaces on the interface card.


Whether support two GE level traffic by EGT2 and EGS2 card
Support 2*GE traffic

Do FXS interfaces on a 4FXS1FXO interface card support polarity reversal
FXS interfaces on a 4FXS1FXO interface card support polarity reversal. This function is disabled by default.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top