How to modify the web password for S series switches

4

How to modify the web password on an S series switch (S1700 excluded):

If you lose the web login password or hope to modify the existing password, log in to the switch for reconfiguration through other methods (such as using the Console port or Telnet).

1. Log in to the switch through other methods (such as using the Console port).

2. Change the user password.

In the following example, AAA authentication is used, the user name is set to huawei, and the modified password is Huawei@123.

[HUAWEI] aaa

[HUAWEI-aaa] local-user huawei password irreversible-cipher Huawei@123

[HUAWEI-aaa] local-user huawei service-type http //Login accounts using HTTP are web login accounts.

[HUAWEI-aaa] local-user huawei privilege level 15

Other related questions:
How to modify the default BootROM password for S series switches
To modify the default BootROM password on S series switches (except S1700 switches), use one of the following methods: 1. Modify the default password on the BootROM menu. a. Log in to a switch through the console port, and restart the device. b. When information similar to "Press Ctrl+B to enter Boot Menu�? or ""Press Ctrl+B or Ctrl+E to enter BootROM menu�?" is displayed

The method of S series switches to modify interface IP
S series switches (except S1700) delete or modify the interface IP address as follows: - To delete an IP address of an interface, you can execute the command in interface-view:undo ip address[ip-address{mask|mask-length}]�?e.g.�?[HUAWEI] interface Vlanif 100 [HUAWEI-Vlanif100] display this # interface Vlanif100 ip address 10.1.1.1 255.255.255.0 # [HUAWEI-Vlanif100] undo ip address [HUAWEI-Vlanif100] display this # interface Vlanif100 # - To modify an IP address or mask of an interface, you can execute the command again in interface-view:ip address[ip-address{mask|mask-length}]�?e.g.�?[HUAWEI] interface Vlanif 100 [HUAWEI-Vlanif100] display this # interface Vlanif100 ip address 10.1.1.1 255.255.255.0 # [HUAWEI-Vlanif100] ip address 10.2.1.1 255.255.0.0 [HUAWEI-Vlanif100] display this # interface Vlanif100 ip address 10.2.1.1 255.255.0.0 #

How to modify the ECMP load balancing mode of S series switch?
ECMP is applied to a network environment where multiple different links reach the same destination address.If you use traditional routing technology, packets destined for the destination address can only use one of the links, the other links in the backup state or invalid state, and in the dynamic routing environment to switch between each other takes some time. The ECMP can be used to multiple links in the network environment at the same time, not only increased the transmission bandwidth, and can be no delay without packet loss backup link data transmission.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top