Configure VLANIF interfaces through the web for S series switches

16

Configure VLANIF interfaces through the Classic web system on S series switches (S1700 excluded):

1. Query VLANIF interface information.

a. Choose Interface Management > VLANIF in the navigation tree to open the VLANIF Interface page.

b. Enter the number of the interface that you want to query, for example, 10. If you do not enter any interface number, all VLANIF interfaces are displayed.

c. Click Query to display all matching records.

d. Select a record and click Details to view details about the record.

2. Create a VLANIF interface.

a. Choose Interface Management > VLANIF in the navigation tree to open the VLANIF Interface page.

b. Click Create to open the Create VLANIF page.

c. Set parameters.

d. Click OK.

3. Modify the VLANIF interface configuration.

a. Choose Interface Management > VLANIF in the navigation tree to open the VLANIF Interface page.

b. Select a VLANIF interface to be changed, and click the corresponding icon to enter the Modify VLANIF interface.

c. Set parameters.

d. Click OK.

4. Delete a VLANIF interface.

a. Choose Interface Management > VLANIF in the navigation tree to open the VLANIF Interface page.

b. Select a record that you want to delete and click Delete. The system asks you whether to delete the record.

c. Click OK.

Other related questions:
Why VLANIF interface on S series switch has too many ARP entries
If ARP strict learning is not enabled on an S series switch, except S1700, and a VLANIF interface on the switch is in a large broadcast domain, the switch learns ARP packets from any devices and generates ARP entries. The switch may need to maintain a large number of ARP entries. To address this problem, run the arp learning strict command to enable ARP strict learning.

Configuring the VLANIF interface on the firewall
Configure the VLANIF interface on the USG as follows: [FW] vlan 10 [FW-vlan-10] quit [FW] interface Vlanif 10 [FW-Vlanif10] quit [FW] interface GigabitEthernet 0/0/1 [FW-GigabitEthernet0/0/1] portswitch [FW-GigabitEthernet0/0/1] port link-type trunk [FW-GigabitEthernet0/0/1] port trunk permit vlan 10 [FW-GigabitEthernet0/0/1] quit

Configure a stacked S series switch on the web page
S series switches in a stack can be configured on the web page.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top