Whether the web system file needs to be uploaded to an S series switch

2

Whether the web system file needs to be uploaded to an S series switch (S1700 excluded):

1. In V200R006 and later versions, the web page file has been integrated in the system software and loaded. If users use the integrated web page file, the following configurations are not required: If users need to upgrade the web page file, log in to the Huawei official website to download a separate web page file and upload it to the switch.

2. Only S2750, S5700LI, S5700S-LI, and all modular switches in V200R005 have integrated and loaded web page files (including the Classic and EasyOperation web systems). Therefore, users only have to configure web users and access the web login page.

For S5700SI, S5700EI, S5710EI, S5700HI, S5710HI, and S6700EI switches in V200R005, they have integrated and loaded the Classic web system file before delivery. If users only require the Classic web system, configure the web user and access the web login page. If users require the EasyOperation web system, re-upload the web page file and load it.

3. For the V200R001 version, you need to upload the web page file and load it.

4. For the V100R006C05&V200R002 version, the system software has integrated the web page file. You need to load it manually.

(5) For S5700-10P-LI of the V200R003 version, the system software has integrated the web page file. You need to load it manually. For other models, the system software has integrated and loaded the web page file.

Other related questions:
How to upload files using the BootROM of S series switches
On S series switches (except S1700 switches), the BootROM allows you to establish connections between the device and other devices or PCs to implement fast transfer of the system software, configuration files, and patch files. Files can be transmitted through serial and Ethernet interfaces. You need to modify the transmission rate during the file transfer using the serial interface. This transmission mode is simple to configure, but has a low transmission rate. File transfer using the Ethernet interface is mainly described here, and the configuration process is as follows: 1. On the BootROM main menu, select Enter ethernet submenu to enter the Ethernet submenu. 2. In the Ethernet submenu, select Modify ethernet interface boot parameter to enter the menu for setting Ethernet parameters. BOOTLINE SUBMENU 1. Set TFTP protocol parameters 2. Set FTP protocol parameters 3. Return to ethernet menu Enter your choice(1-3): 3. Select the file transfer mode as required. The following takes FTP parameter settings as an example: BOOTLINE SUBMENU 1. Set TFTP protocol parameters 2. Set FTP protocol parameters 3. Return to ethernet menu Enter your choice(1-3): 2 '.' = clear field; '-' = go to previous field; ^D = quit Load File name : devicesoftware.cc //Enter the name of the file to be uploaded. Switch IP address : 192.168.1.15:ffffff00 //Enter the management IP address of the device, and ensure that the management IP address is on the same network segment as the IP address of the FTP server. Server IP address : 192.168.1.40 //Enter the IP address of the FTP server. FTP User Name : huawei //Enter the user name for logging in to the FTP server. FTP User Password : //Enter the password in cipher text for logging in to the FTP server. After the configuration is complete, the device automatically displays the Ethernet parameter setting menu. 4. Select Return to ethernet menu to return to the Ethernet submenu. 5. In the Ethernet submenu, you can select Download file to Flash through ethernet interface to download files in the FTP server, or select Upload Configuration file to Ftp through ethernet interface to upload the configuration file to the FTP server. The setting for the TFTP server is similar to that for the FTP server, but you do not need to configure the user name and password. Note that the interface of the BootROM menu differs slightly on different devices. Perform configurations according to the actual displayed information on the device. More information about how to upload files through BootROM is as follows:

Configuring an S series switch as an FTP server
Perform the following operations to configure an S series switch (except the S1700) as an FTP server: 1. Configure an IP address for the switch. 2. Configure the switch as an FTP server. system-view [HUAWEI] ftp server enable //Enable the FTP service. [HUAWEI] aaa [HUAWEI-aaa] local-user u1 password irreversible-cipher ftppwd@6789 //Set the FTP user name to u1 and password to ftppwd@6789. [HUAWEI-aaa] local-user u1 service-type ftp //Set the access type of the user to FTP. [HUAWEI-aaa] local-user u1 privilege level 15 //Set the user priority. [HUAWEI-aaa] local-user u1 ftp-directory flash:/ //Specify the directory that the user can access, which may be cfcard:/ for some S series modular switches. [HUAWEI-aaa] return

How to upload a license file to an S series switches
oad a license file to an S series (except the S1700) switch using one of the following methods:

Method 1: Using a TFTP server Use a PC as an TFTP server, run the TFTP server program on the PC, and configure the PC. Note: To use a TFTP server to upload a license file, you need to purchase the TFTP server software.s The operation procedure is as follows: 1. Configure a TFTP server. Click Browse to set Current Directory for storing the system software to be loaded. The TFTP server address in Server interfaces is automatically set by the system. 2. Run the tftp [ -a source-ip-address | -i interface-type interface-number ] tftp-server [ public-net | vpn-instance vpn-instance-name ] put source-filename [ destination-filename ] command to upload a license file to the TFTP server.

Method 2: Uploading a license file from an FTP server to a switch that functions as an FTP client Note: To use an FTP server to upload a license file, you need to purchase the FTP server software. The operation procedure is as follows: 1. Configure an FTP server, set the user name and password, and set the FTP directory. 2. Run the ftp [ -a source-ip-address | -i interface-type interface-number ] host-ipv4 [ port-number ] [ public-net | vpn-instance vpn-instance-name ] command to log in to the FTP server. Enter the user name and password as prompted. 3. Run the get remote-filename [ local-filename ] command to download a license file to the FTP client.

Method 3: Using a switch as an FTP server and uploading a license file to the switch from an FTP client The operation procedure is as follows: 1. Run the system-view command to enter the system view. 2. Run the ftp [ ipv6 ] server enable command to enable the FTP server. 3. Run the aaa command to enter the AAA view. 4. Run the local-user user-name password cipher password command to set the local user name and password. 5. Run the local-user user-name privilege level level command to set the local user level. Note: The user level must be set to 3 or higher. Otherwise, the FTP connection cannot be established. 6. Run the local-user user-name service-type ftp command to configure the FTP service type. 7. Run the local-user user-name ftp-directory directory command to configure an authorized directory for the FTP user. 8. Access the CLI of a PC and run the ftp server-ip-address command. Enter the user name and password as prompted to log in to the FTP server. 9. Run the put license-file command to upload a license file to the FTP server. After being successfully uploaded, the license file will be stored in the default directory of the FTP server.


How to upload the web file of a WLAN device
How to upload the web file of a WLAN device:
Upload the web file to the device through FTP:
1.  Configure the FTP function and FTP user information about the device.
[Huawei] ftp server enable //Enable the FTP service.
[Huawei] aaa
[Huawei-aaa] local-user admin1234 password irreversible-cipher Helloworld@6789  //Create an FTP user with the user name admin1234 and password Helloworld@6789
[Huawei-aaa] local-user admin1234 privilege level 15
[Huawei-aaa] local-user admin1234 service-type ftp  //Configure the user service type to FTP.
[Huawei-aaa] local-user admin1234 ftp-directory flash:  //Configure the directories to which this FTP user has access.
[Huawei-aaa] quit
[Huawei] quit
<Huawei> save
2.  Connect to the device through FTP from the terminal PC, and enter the user name admin1234 and password Helloworld@6789. Then, upload the file in binary mode.
C:\Documents and Settings\Administrator> ftp 10.136.23.5  //IP address of the WLAN device used to interconnect to the PC.
Connected to 10.136.23.5.
220 FTP service ready.
User (10.136.23.5:(none)): admin1234             
331 Password required for admin1234.
Password:
230 User logged in.
ftp> binary
200 Type set to I.
ftp>
3.  Upload the web file to the device.
ftp> put web.zip  
200 Port command okay.
150 Opening BINARY mode data connection for devicesoft.cc
226 Transfer complete.
ftp:   76556  bytes,  3.35s  560.79 KB/s.
4.  Check the files and subdirectories in the current directory.
<Huawei> dir
Directory of flash:/
  Idx  Attr     Size(Byte)  Date        Time       FileName
    0  -rw-          6,311  Feb 17 2012 14:05:04   backup.cfg
    1  -rw-         76,556  Mar 06 2012 17:20:10   web.zip
5.  Load the web file.
<Huawei> system-view
[Huawei] http server load web.zip      //Load the web file. If it has been loaded, ignore it.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top