Incomplete web page menu for S series switches

22

The web page menu on an S series switch (S1700 excluded) is incomplete:

By default, web users are at level 0, and can only run diagnostic commands such as ping and tracert, or basic query commands.

Set the user level in the AAA view to configure user functional privileges:

[HUAWEI] aaa

[HUAWEI-aaa] local-user huawei password irreversible-cipher Huawei@123

[HUAWEI-aaa] local-user huawei service-type http // Users log in to the device through HTTP are web login users.

[HUAWEI-aaa] local-user huawei privilege level 15 // Change the user permission level to management level.

[HUAWEI-aaa] quit

[HUAWEI] quit

Save configurations and re-log in to the web page for authentication.

Other related questions:
Incomplete web page menu on an AR router
The problem is caused due to insufficient user permissions: The default level of web users is 0, which indicates that the users can only use network diagnosis commands (ping and Tracert) or query basic information. You can improve user permissions using command lines or through the web NMS. 1. Command lines: Configure a user level in the AAA view. [Huawei] aaa [Huawei-aaa] local-user huawei password irreversible-cipher Huawei@123 [Huawei-aaa] local-user huawei service-type http //An account with the login mode containing the HTTP type has the web login permission. [Huawei-aaa] local-user huawei privilege level 15 //Change the user permission to the administrator level. [Huawei-aaa] quit [Huawei] quit In the user view, run the save command to save the configuration, and re-log in to a web page for verification. 2. Web NMS: Log in to the web NMS using the super administrator account, and choose Web-based Configuration > User Management > User Management to change the user permission.

Menu structure of endpoint web pages and remote control UIs
After knowing the menu structure on the web interface and remote control UI, you can quickly find the entry to your desired function. - For details about the menu structure on the web interface and remote control UI of the TE30, see chapter 3 "Menu Structure of the Web Interface" and chapter A "Menu Structure of the Remote Controlled UI" in the HUAWEI TE30 Videoconferencing Endpoint V100R001C10SPC600 Administrator Guide. - For details about the menu structure on the web interface and remote control UI of the TE40/TE50/TE60, see chapter 3 "Menu Structure of the Web Interface" and chapter B "Menu Structure of the Remote Controlled UI" in the HUAWEI TE40&TE50&TE60 Videoconferencing Endpoint V100R001C10SPC300 Administrator Guide. - For details about the menu structure on the web interface of HUAWEI 9000 HD videoconferencing endpoints, see chapter E "Menus" in the HUAWEI 9000 HD Videoconferencing Endpoint V100R011C03 Administrator Guide. - For details about the menu structure on the remote control UI of ViewPoint 8000 series endpoints, see section A.3 "Menu Structure" in the ViewPoint Group Video Terminal V600R481C02 Administrator Guide.

Configure a stacked S series switch on the web page
S series switches in a stack can be configured on the web page.

Configure IPSG (for example, configure IP address and MAC address binding) for S series switches on the web page
For details on how to configure IPSG for S series switches (except the S1700) on the web page, see "IPSG Configuration" and "Static User Binding" in Web System Guide.

The page for adding or modifying device information on the SMC2.0 web interface is displayed incompletely. What can I do?
The page for adding or modifying device information on the SMC2.0 web interface is displayed incompletely. Resolve this issue as follows: - If the browser is Internet Explorer, press F12 to open the Developer Tools, and change the Compatibility View to IE8. - This issue is caused by the Compatibility View setting of Internet Explorer. If the Compatibility View is disabled, this issue will be resolved. If pressing F12 does not bring the Developer Tools window into the main browser window but the Developer Tools indication appears in the status bar at the bottom, press F12 again, and then press CTRL+P to bring up the Developer Tools window in the lower part. If the 360 browser is used, disable the Compatibility View.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top