Configure an IP address for web platform login

42

Configure an IP address for web platform login on an S series switch (S1700 excluded):

For devices with a management network interface, it is recommended that you configure the IP address of the management interface. In the following example, configure the IP address of VLANIF1 interface.

[HUAWEI] interface vlanif 1

[HUAWEI-Vlanif1] ip address 172.16.1.1 24

[HUAWEI-Vlanif1] quit

[HUAWEI] quit

Ensure that the PC can ping the switch successfully.

Other related questions:
How to configure the web login IP address of WLAN devices
Configure the web login IP address of WLAN devices as follows: For devices with management network ports, you are advised to directly configure an IP address for the management network port. The following command output is an example for configuring the IP address of the VLANIF 1 interface. [Huawei] interface vlanif 1 [Huawei-Vlanif1] ip address 172.16.1.1 24 [Huawei-Vlanif1] quit [Huawei] quit Ensure that the PC can ping the WLAN devices.

Common operations for managing WLAN APs
Common operations for managing APs 1. Log in to an AC and change an AP's login user name and password. - V200R005: [HUAWEI] wlan [HUAWEI-wlan-view] wlan ap username huawei password cipher Enter the password (plain-text password of 8-32 characters or cipher-text password of 32 or 56 characters): Confirm password: [HUAWEI-wlan-view] commit ap 1 //Run the display ap command to obtain the AP ID if you forget the AP's login password. Warning: Committing configuration may cause service interruption, continue?[Y/N] :y To restore the default user name and password, run the undo wlan ap username command. By default, the user name is admin and password is admin@huawei.com. - V200R006: [HUAWEI] wlan [HUAWEI-wlan-view] ap-reset ap-id 1 Enter the password (plain-text password of 8-32 characters or cipher-text password of 48 or 68 characters): Confirm password: To restore the default user name and password, run the undo ap username command. By default, the user name is admin and password is admin@huawei.com. 2. Restart an AP. - V200R005: [HUAWEI] wlan [HUAWEI-wlan-view] ap-reset id 1 Warning: Reset AP, continue?[Y/N]:y Operation on the web platform: Choose Configuration > AP Management > AP Information. Select an AP and click Restart. - V200R006: [HUAWEI] wlan [HUAWEI-wlan-view] ap-reset ap-id 1 Warning: Reset AP, continue?[Y/N]:y Operation on the web platform: Choose Maintenance > AP Maintenance > AP Restart. Select an AP and click Restart. 3. Restore factory settings. - V200R005: Run the ap-manufacturer-config id ap-id command to restore factory settings of an AP. - V200R005: Run the ap manufacturer-config { ap-name ap-name | ap-mac ap-mac | ap-id ap-id } command to restore factory settings of an AP. 4. Change the AP name. - V200R005: [HUAWEI-wlan-view] ap id 1 [HUAWEI-wlan-ap-1] ap-sysname ap_01 Operation on the web platform: Choose Configuration > AP Management > AP Information. Click the icon of a specific AP and change the AP name. - V200R006: [HUAWEI-wlan-view] ap-rename ap-name N1-2 new-name N2-2 Operation on the web platform: Choose Configuration > AP Configuration > AP Information. Click the name of a specific AP and change the AP name. 5. Delete an AP. - V200R005: [HUAWEI-wlan-view] undo ap id xx Operation on the web platform: Choose Configuration > AP Management > AP Information. Select an AP and click Delete. If ACs work in active/standby mode, you are advised to disconnect the AP and delete the AP from both the active and standby ACs. - V200R006: [AC6605-wlan-view] undo ap-id xx Operation on the web platform: Choose Configuration > AP Configuration > AP Information. Select an AP and click Delete. If ACs work in active/standby mode, you are advised to disconnect the AP and delete the AP from both the active and standby ACs. 6. IP addresses of APs cannot be modified on an AC.

How to configure rate limiting based on the IP address through the web platform on the AR
The procedure for configuring rate limiting based on the IP address through the web platform is as follows: 1. Choose QoS > Interface Rate Limit to access the Interface Rate Limit. 2. Click Create in Interface Rate Limit List. 3. On the Create Interface Rate Limit page, select IP, and select or enter parameters. 4. Click OK to save the parameter settings.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top