How to disable web function for S switch?

2

[Huawei] undo http server enable
for V100R006 and above�?[Huawei] undo http secure-server enable

Other related questions:
How to disable the web function on an AR router
How to disable the web function on an AR router? For routers that support web NMS, disable the HTTP server on the routers to disable the web function. Specific method is as follows: [Huawei] undo http server enable //Disable the HTTP service. [Huawei] undo http secure-server enable //Disable the HTTPS service.

How to disable the web function on WLAN devices
To disable the web function, you need to disable the HTTP server function on WLAN devices. Perform the following steps: [Huawei] undo http server enable For V200R005 and later versions, the HTTPS function is enabled by default. You must disable HTTPS after disabling the HTTP server function. [Huawei] undo http secure-server enable

How to disable the web verification code function on an AR router
All V200R003 models support verification codes. From V200R005 on, the web NMS does not support verification codes. On V200R003, a verification code is needed for web login, and this function is always enabled and cannot be disabled.

How can I disable the MCU web login function in CLI mode?
To disable the MCU web login function in CLI mode, perform the following operations: Log in to the MCU main control board in Telnet or SSH2 mode (the user name and password are admin and admin or admin and Change_Me). Access the system configuration interface. Then, run the following commands: sys [HUAWEI VP9630]telnet-config [HUAWEI VP9630-Telnet]enable- enable-http enable-logon enable-network-login enable-security-mode //Set enable-http to 0 to disable the web login function. [HUAWEI VP9630-Telnet]enable-network-login enable-network-login [HUAWEI VP9630-Telnet]enable-network-login - mode{0:only enable FE0, 1:only enable GE0, 2:only enable GE1 3:enable all interface, default:3} //For security purposes, you may need to disable some ports.

Enable and disable PoE on an S series switch
Enable or disable the PoE function on S series switches:

1. By default, the PoE function is enabled on an interface
2. Enable or disable PoE power supply.
<HUAWEI>system-view
[HUAWEI]interface gigabitethernet 1/0/0
[HUAWEI-GigabitEthernet1/0/0]undo poe enable  //Disable PoE power supply.
[HUAWEI-GigabitEthernet1/0/0]poe enable       //Enable PoE power supply.

The downlink electrical interfaces of PoE switches support PoE power supply, with up to 30 W power on each interface. The maximum power supply distance is 100 m.
Only ES0D0G48VA00 (S7700)/LE0DG48VEA00 (S9300) cards of modular switches (S7700/S9700/S9300/S12700) support PoE power supply.

If the switch connects to 48 V standard PoE powered devices but cannot negotiate power supply capabilities with the devices, you can run poe force-power on the interfaces to forcibly power on the devices.


If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top