Bill of Quotation (BOQ) recommended based on the port capacity of S series switches

98

For details about specifications of S series switches, contact the local Huawei office.

Other related questions:
Protocol-based VLAN assignment on S series switch
Example of configuring protocol-based VLAN assignment for S series switches (except S1700 switches): 1. Configuration roadmap 1). Create a VLAN and determine the VLAN to which each service belongs. 2). Associate a protocol with the VLAN, so that the switch can determine the VLAN ID of a received packet according to the protocol (or protocol suite) of the packet. 3. Add interfaces to the VLAN, so that the packets of the protocol-based VLAN can pass through the interfaces. 4. Associate interfaces with the protocol-based VLAN. The system then determines the VLAN ID of a received packet according to the association between the protocol type of the packet and the VLAN. 2. Configuration procedure 1) Create a VLAN. [HUAWEI] vlan batch 10 2) Associate a protocol with the VLAN. [HUAWEI] vlan 10 [HUAWEI-vlan10] protocol-vlan ipv4 #Associate IPv4 with VLAN 10. [HUAWEI-vlan10] quit 3) Associate an interface with the protocol-based VLAN. [HUAWEI] interface gigabitethernet 0/0/2 [HUAWEI-GigabitEthernet0/0/2] protocol-vlan vlan 10 all priority 5 #Associate GE0/0/2 with VLAN 10 and set the 802.1p priority of VLAN 10 to 5. [HUAWEI-GigabitEthernet0/0/2] quit 4) Configure interfaces. [HUAWEI] interface gigabitethernet 0/0/1 [HUAWEI-GigabitEthernet0/0/1] port link-type trunk [HUAWEI-GigabitEthernet0/0/1] port trunk allow-pass vlan 10 #Configure the interface to allow packets of VLAN 10 to pass through. [HUAWEI-GigabitEthernet0/0/1] quit [HUAWEI] interface gigabitethernet 0/0/2 [HUAWEI-GigabitEthernet0/0/2] port link-type hybrid [HUAWEI-GigabitEthernet0/0/2] port hybrid untagged vlan 10 #Configure the interface to allow packets of VLAN 10 to pass through in untagged mode.

Do S series switches support ratio-based load balancing
S series switches (except the S1700) support per-flow load balancing but do not support ratio-based load balancing.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top