Why is the traffic accounting result affected after the reset counters interface command is used to clear the packet statistics on interfaces of S series switches

29

For S series switches (except S1700 switches), the traffic accounting is based on the packet statistics on each interface. If you manually clear the packet statistics collected on interfaces, the result of the traffic accounting is definitely affected. Therefore, in normal applications, use the reset counters interface command to clear the packets statistics collected on interfaces with caution.

Other related questions:
How do I view and clear traffic statistics on an interface

To view traffic statistics on an interface, run the display interface [ interface-type [ interface-number [.subnumber] ] ] command in any view, or run the display this interface command in the interface view.

To clear the traffic statistics on an interface, run the reset counters interface [ interface-type [ interface-number ] command in the user view.


Does a VLANIF interface on an S series switch support packet filtering configured using the traffic-policy command
You cannot run the traffic-filter command to configure packet filtering on a VLANIF interface of S series switches (except the S1700). You can run the traffic-filter command in the following interface views: - Ethernet interface view, such as the GE interface view and the XGE interface view. The specific Ethernet interface view is determined by the switch and card models. - Logical interface view, including the Eth-Trunk interface view and the port group view, but not including the VLANIF interface view.

Can the S Switch support traffic statistic for Vlan interface ?
1. All the chassis Switch can support traffic statistic. 2. S1720、S2720、S2750、S5700LI、S5700S-LI and S5710-X-LI can not support, other box Switch can support. we need configure statistic enable in vlan view for S5700SI、S5720SI、S5720S-SI.

How to clear the recycle bin of an S series switch
For S series switches (except S1700 switches), run the following command to clear the recycle bin:
<HUAWEI> reset recycle-bin
Note: The delete XXX command in the user view only moves files to the recycle bin, but does not release the storage space. You can run the dir/all command to view information about all files, including deleted files in the recycle bin marked in brackets ([ ]). These files can be restored using the undelete command. To permanently delete these files from the recycle bin, run the reset recycle-bin command. The files that are deleted using the delete command without the /unreserved parameter are saved in the recycle bin.

How to run commands to reset the web interface account and password of the Huawei ViewPoint 9030
Method to reset the web interface account and password of the Huawei ViewPoint 9000 series endpoint: After you log in to the web interface through SSH, run the following command: web password set admin [new password string].

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top