Divide network segments on the S1700

8

S1700 switches are Layer 2 switches. You can add switch interfaces to different VLANs to isolate hosts on different network segments.
Interfaces on NMS-free S1700 switches cannot be added to VLANs manually. The interfaces belong to VLAN 1 by default.

Other related questions:
Configure a VLAN on the S1700-FR or S1700-GFR switch
Configure a VLAN on an S1700-FR or S1700-GFR switch as follows: 1. Create a VLAN. a. Choose Service Management > VLAN and click the VLAN tab. VLANs configured on the switch are displayed. b. Click New to create a VLAN. c. Set a VLAN ID and VLAN name, and click Apply. 2. Add an interface to the VLAN. a. Choose Service Management > VLAN and click the Interface tab. b. Select an interface from the interface list and click Configure to modify the VLAN attributes of the interface. c. After completing the configuration, click Apply.

How to configure the service network segment and the management network segment connected
default route

How to configure the interworking between the service network segment and management network segment on S series switches
User requirements: In the following network topology, the IP address of the PC and the management address of the S2700 are not on the same network segment. The user wants to remotely log in to the S2700 from the PC, so that the service gateway and the management network segment can communicate with each other. Network topology: S5700 (gateway) �?S2700 �?PC Networking description: Configure the S5700 as the service gateway and device management gateway. Configure the management IP address for the S2700 and enable the switch to transparently transmit packets of the service VLAN 10 and the management VLAN 100. Connect GE0/0/1 on the S5700 to GE0/0/1 on the S2700, and FE0/0/1 on the S2700 to the PC. Service planning: Service VLAN: 10 Management VLAN: 100 IP address of VLAN 10 of the S5700: 192.168.10.1 IP address of VLAN 100 of the S5700: 100.1.1.1 IP address of VLAN 100 of the S2700: 100.1.1.2 Service IP address of the PC: 192.168.10.2 S5700 configuration [Huawei]vlan 10 [Huawei -vlan10]quit [Huawei] vlan 100 [Huawei-vlan100]quit [Huawei]interface Vlanif 10 //Configure an IP address for the service VLAN 10. [Huawei-Vlanif10]ip address 192.168.10.1 24 [Huawei-Vlanif100]quit [Huawei]interface Vlanif 100 //Configure an IP address for the management VLAN 100. [Huawei-Vlanif100]ip address 100.1.1.1 24 [Huawei-Vlanif100]quit [Huawei]interface GigabitEthernet 0/0/1 //Configure the interface connected to the S2700 and allow the interface to transparently transmit packets of VLAN 10 and VLAN 100. [Huawei-GigabitEthernet0/0/1]port link-type trunk [Huawei-GigabitEthernet0/0/1]port trunk allow-pass vlan 10 100 [Huawei-GigabitEthernet0/0/1] quit [Huawei]quit S2700 configuration [Huawei]vlan 10 [Huawei -vlan10]quit [Huawei] vlan 100 [Huawei-vlan100]quit [Huawei]interface Vlanif 100 //Configure a management IP address for the S2700. [Huawei-Vlanif100]ip address 100.1.1.2 24 [Huawei-Vlanif100]quit [Huawei]interface GigabitEthernet 0/0/1 //Configure the interface connected to the S5700 and allow the interface to transparently transmit packets of VLAN 10 and VLAN 100. [Huawei-GigabitEthernet0/0/1]port link-type trunk [Huawei-GigabitEthernet0/0/1]port trunk allow-pass vlan 10 100 [Huawei-GigabitEthernet0/0/1] quit [Huawei]interface Ethernet 0/0/1 //Configure the interface connected to the PC to allow packets of the service VLAN 10 to pass through. [Huawei-Ethernet0/0/1]port link-type access [Huawei-Ethernet0/0/1]port default vlan 10 [Huawei-Ethernet0/0/1]quit [Huawei]ip route-static 0.0.0.0 0.0.0.0 100.1.1.1 //On the S2700, configure a default route destined for the management IP address of the S5700. [Huawei]quit PC configuration IP: 192.168.10.2 Gateway: 192.168.10.1 Subnet mask: 255.255.255.0

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top