Whether the S1700 functions as an aggregation switch

50

Can an S1700 switch function as an aggregation switch?
The S1700 mainly applies to individual users and small- and medium-sized enterprises, functioning as the access switch. When a few terminals are connected, the S1700 can function as the aggregation switch. When many terminals are connected and the traffic volume is high, you are advised to use switches with higher specifications than the S1700 as aggregation switches.

Other related questions:
Whether the S1700 functions as the gateway
S1700 switches are used as Layer 2 switches and do not function as gateways.

Whether S1700 switches are GE switches
If you understand the naming rules of the S1700, you can determine whether an S1700 switch is a GE switch or not based on its model.

Configure Eth-Trunk on the S1700-FR or S1700-GFR switch
Configure an Eth-Trunk on an S1700-FR or S1700-GFR switch as follows: 1. Add a trunk. a. Choose Interface Management > Eth-Trunk. b. Click New to create a trunk group. c. On the page displayed, configure trunk parameters and add member interfaces to the trunk group. d. Click Apply. 2. Set trunk properties. a. Choose Interface Management > Eth-Trunk. b. Click the editing icon on the right of the trunk to be configured. c. Configure trunk parameters. d. Click Apply.

Do CE series switches support VLAN aggregation
All models of CE switches support VLAN aggregation (super VLAN).

Configure IPSG on the S1700-FR or S1700-GFR switch
Configure IPSG on an S1700-FR or S1700-GFR switch as follows: 1. Choose Security > IPSG. 2. Select the interface on which IPSG is configured and click Configure. 3. Set IPSG Status to Enable. 4. Select an IPSG policy bound to the interface from the IPSG Matching Options drop-down list box. 5. Click Apply. Note: If IPSG is enabled on an interface where no binding table is configured, the interface blocks all IP data packets. IPSG cannot be enabled on a DHCP snooping trusted interface. An interface enabled with IPSG cannot be configured as the trusted interface. If an interface joins an aggregation group, IPSG cannot be enabled on the interface. An interface enabled with IPSG cannot join an aggregation group.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top