Modify attributes of interfaces on the S1728GWR-4P switch

25

Modify the attributes (including the auto-negotiation mode, manual setting of port rate, full duplex mode, and traffic control) of an interface on an S1728GWR-4P switch using either of the following methods:
1. Port-based configuration:
a. Choose Interface > Port > General.
b. Select Configure by Port Range from the Action drop-down list box. Configure parameters of interfaces within a range in a batch.
c. After completing the configuration, click Apply. The configuration takes effect immediately. To check status of each interface, choose Interface > Port > General and select Show Information from the Action drop-down list box.�?2. Port list based configuration:
a. Choose Interface > Port > General.
b. Select Configure by Port List from the Action drop-down list box. Configure parameters of each interface.
c. After completing the configuration, click Apply. The configuration takes effect immediately. To check status of each interface, choose Interface > Port > General and select Show Information from the Action drop-down list box.

Other related questions:
Modify the PVID of an interface on the S1728GWR-4P switch
Modify the PVID of an interface on an S1728GWR-4P switch as follows: 1. Choose VLAN > Static and select Edit/Show Member by Interface from the Action drop-down list box. 2. Set Interface to Port and select a port number. 3. Set Mode to 1Q Trunk or Hybrid. 4. Select a VLAN ID from the PVID drop-down list box, and click Apply. 5. Choose System > File and click Apply to save the configuration.

Configure STP on an interface of the S1728GWR-4P switch
Configure STP on an interface of an S1728GWR-4P switch as follows: 1. Choose Spanning Tree > STP. 2. Select Configure Interface from the Step drop-down list box. 3. Select Configure from the Action drop-down list box. 4. Configure the parameters such as Spanning Tree, Admin Link Type, Priority, and Admin Path Cost. 5. Click Apply.

Configure a VLAN on the S1728GWR-4P switch
Configure a VLAN on an S1728GWR-4P switch as follows: 1. Create a VLAN. Choose VLAN > Static and select Add from the Action list box. Enter a VLAN ID, and click Apply. 2. Add VLAN members. Choose VLAN >Static. From the Action drop-down list box, select Modify, Edit/Show Member by Interface, Edit Member by Interface Range, or Edit/Show Member by VLAN to configure members for a specified VLAN, interface, or interface range. In the interface list displayed, configure the VLAN attributes of interfaces.

Save the configuration of the S1728GWR-4P switch
Save the configuration of an S1728GWR-4P switch as follows: Choose System > File, select Config File from the Action drop-down list box, and save a configuration file. Perform the following steps: 1. Choose System > File. 2. Select Config File from the Action drop-down list box. 3. Select save the current configuration from the operation list. 4. Choose needs to be saved in the Save as file name, or rename files. 5. Click Apply.

Display STP configuration of an interface on the S1728GWR-4P switch
Display the STP configuration of an interface on an S1728GWR-4P switch as follows: 1. Choose Spanning Tree > STP. 2. Select Configure Interface from the Step drop-down list box. 3. Select Show Information from the Action drop-down list box. 4. The configured parameters (such as STP Status, Port Role, Designated Bridge, Oper Path Cost, and Oper Edge Port) are displayed.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top