Configure rate limiting on the S1728GWR-4P switch

24

Configure rate limiting on an S1728GWR-4P switch as follows:
1. Choose Traffic > Rate Limit.
2. Select Enable in the Status column of the ports to be enabled with rate limiting.
3. Set limits for the ports.
4. Click Apply.

Other related questions:
Configure a VLAN on the S1728GWR-4P switch
Configure a VLAN on an S1728GWR-4P switch as follows: 1. Create a VLAN. Choose VLAN > Static and select Add from the Action list box. Enter a VLAN ID, and click Apply. 2. Add VLAN members. Choose VLAN >Static. From the Action drop-down list box, select Modify, Edit/Show Member by Interface, Edit Member by Interface Range, or Edit/Show Member by VLAN to configure members for a specified VLAN, interface, or interface range. In the interface list displayed, configure the VLAN attributes of interfaces.

Save the configuration of the S1728GWR-4P switch
Save the configuration of an S1728GWR-4P switch as follows: Choose System > File, select Config File from the Action drop-down list box, and save a configuration file. Perform the following steps: 1. Choose System > File. 2. Select Config File from the Action drop-down list box. 3. Select save the current configuration from the operation list. 4. Choose needs to be saved in the Save as file name, or rename files. 5. Click Apply.

Configure port isolation on the S1728GWR-4P switch
Configure port isolation on an S1728GWR-4P switch as follows: 1. Choose Security > Port Isolation. 2. Set Interface to Port or Trunk. 3. Enable or disable port isolation on a specified interface or trunk. 4. Click Apply to complete the configuration.

Globally configure STP on the S1728GWR-4P switch
Configure STP on an S1728GWR-4P switch globally as follows: 1. Choose Spanning Tree > STP. 2. Select Configure Global from the Step drop-down list box. 3. Select Configure from the Action drop-down list box. 4. Configure the parameters such as Spanning Tree Status, Spanning Tree Type, Priority, and Path Cost Method. 5. Click Apply.

Configure port mirroring on the S1728GWR-4P switch
Configure port mirroring on an S1728GWR-4P switch as follows: 1. Choose Interface > Port > Mirror and select Add from the Action drop-down list box. 2. Configure Source Port, Target Port, and Type. 3. After completing the configuration, click Apply. Select Show/Delete from the Action drop-down list box to check the current port mirroring configuration.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top