Configure STP on an interface of the S1728GWR-4P switch

10

Configure STP on an interface of an S1728GWR-4P switch as follows:
1. Choose Spanning Tree > STP.
2. Select Configure Interface from the Step drop-down list box.
3. Select Configure from the Action drop-down list box.
4. Configure the parameters such as Spanning Tree, Admin Link Type, Priority, and Admin Path Cost.
5. Click Apply.

Other related questions:
Configure STP on an interface of the S1728GWR-4P switch
Configure STP on an interface of an S1728GWR-4P switch as follows: 1. Choose Spanning Tree > STP. 2. Select Configure Interface from the Step drop-down list box. 3. Select Configure from the Action drop-down list box. 4. Configure the parameters such as Spanning Tree, Admin Link Type, Priority, and Admin Path Cost. 5. Click Apply.

Globally configure STP on the S1728GWR-4P switch
Configure STP on an S1728GWR-4P switch globally as follows: 1. Choose Spanning Tree > STP. 2. Select Configure Global from the Step drop-down list box. 3. Select Configure from the Action drop-down list box. 4. Configure the parameters such as Spanning Tree Status, Spanning Tree Type, Priority, and Path Cost Method. 5. Click Apply.

Disable STP on the S1728GWR-4P switch
Disable STP on an S1728GWR-4P switch as follows: Perform the following operations to disable STP globally on an S1728GWR-4P switch: 1. Choose Spanning Tree > STP. 2. Select Configure Global from the Step drop-down list box, and Configure from the Action drop-down list box. 3. Deselect Enabled in Spanning Tree. 4. Click Apply. Perform the following operations to disable STP on an interface of an S1728GWR-4P switch: 1. Choose Spanning Tree > STP. 2. Select Configure Inter from the Step drop-down list box, and Configure from the Action drop-down list box. 3. Deselect Enabled in the Spanning Tree column of corresponding interfaces. 4. Click Apply.

Display global STP configuration of the S1728GWR-4P switch
Display the global STP configuration of an S1728GWR-4P switch as follows: 1. Choose Spanning Tree > STP. 2. Select Configure Global from the Step drop-down list box. 3. Select Show Information from the Action drop-down list box. 4. The configured parameters (such as Spanning Tree Status, Spanning Tree Type, Designated Root, Root Path Cost, and Bridge ID) are displayed.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top