Change the management IP address of the S1728GWR-4P switch

16

Change the management IP address of an S1728GWR-4P switch as follows:
Choose System > IP. On the page displayed, configure the switch information such as the management VLAN and IP address. By default, the switch obtains an IP address through DHCP. If the switch fails to obtain an IP address through DHCP, the switch uses the IP address of 192.168.0.1.
Perform the following operation to configure the switch to obtain an IP address through DHCP:
1. Choose System > IP.
2. Specify an available management VLAN for the switch and set IP地址方式 to DHCP.
3. Click Apply to save the configuration.
4. Click Restart DHCP to obtain a new IP address.

Perform the following operations to configure a static IP address for the switch:
1. Choose System > IP.
2. Specify an available management VLAN for the switch, set IP Address Mode to Static, and enter an IP address, subnet mask, and gateway IP address.
3. Click Apply to save the configuration.

Other related questions:
Query MAC address entries on the S1728GWR-4P switch
Query MAC address entries on an S1728GWR-4P switch as follows: 1. Choose MAC Address > Static or Dynamic. 2. Select Show from the Action drop-down list box. The bound static MAC address or dynamic MAC address is displayed.

Configure a VLAN on the S1728GWR-4P switch
Configure a VLAN on an S1728GWR-4P switch as follows: 1. Create a VLAN. Choose VLAN > Static and select Add from the Action list box. Enter a VLAN ID, and click Apply. 2. Add VLAN members. Choose VLAN >Static. From the Action drop-down list box, select Modify, Edit/Show Member by Interface, Edit Member by Interface Range, or Edit/Show Member by VLAN to configure members for a specified VLAN, interface, or interface range. In the interface list displayed, configure the VLAN attributes of interfaces.

Save the configuration of the S1728GWR-4P switch
Save the configuration of an S1728GWR-4P switch as follows: Choose System > File, select Config File from the Action drop-down list box, and save a configuration file. Perform the following steps: 1. Choose System > File. 2. Select Config File from the Action drop-down list box. 3. Select save the current configuration from the operation list. 4. Choose needs to be saved in the Save as file name, or rename files. 5. Click Apply.

Add static MAC address entries on the S1728GWR-4P switch
Add a static MAC address entry on an S1728GWR-4P switch as follows: 1. Choose MAC Address > Static. 2. Select Add from the Action drop-down list box 3. Select an interface, specify a MAC address for the interface, and click Apply.

Configure port isolation on the S1728GWR-4P switch
Configure port isolation on an S1728GWR-4P switch as follows: 1. Choose Security > Port Isolation. 2. Set Interface to Port or Trunk. 3. Enable or disable port isolation on a specified interface or trunk. 4. Click Apply to complete the configuration.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top