Configure traffic shaping on the S1700-FR or S1700-GFR switch

9

Configure traffic shaping on an S1700-FR or S1700-GFR switch as follows:
1. Choose QoS > Traffic Shaping.
2. Select the interface on which traffic shaping is configured and click Configure.
3. Deselect Unlimited and enter a rate limit range in Minimum Rate/Maximum Rate.
4. Click Apply.

Other related questions:
Configure a VLAN on the S1700-FR or S1700-GFR switch
Configure a VLAN on an S1700-FR or S1700-GFR switch as follows: 1. Create a VLAN. a. Choose Service Management > VLAN and click the VLAN tab. VLANs configured on the switch are displayed. b. Click New to create a VLAN. c. Set a VLAN ID and VLAN name, and click Apply. 2. Add an interface to the VLAN. a. Choose Service Management > VLAN and click the Interface tab. b. Select an interface from the interface list and click Configure to modify the VLAN attributes of the interface. c. After completing the configuration, click Apply.

Save the configuration of an S1700-FR or S1700-GFR switch
Save the configuration of an S1700-FR or S1700-GFR switch as follows: After all configuration operations are completed, click Parameter Saving in the menu bar.

Configure IPSG on the S1700-FR or S1700-GFR switch
Configure IPSG on an S1700-FR or S1700-GFR switch as follows: 1. Choose Security > IPSG. 2. Select the interface on which IPSG is configured and click Configure. 3. Set IPSG Status to Enable. 4. Select an IPSG policy bound to the interface from the IPSG Matching Options drop-down list box. 5. Click Apply. Note: If IPSG is enabled on an interface where no binding table is configured, the interface blocks all IP data packets. IPSG cannot be enabled on a DHCP snooping trusted interface. An interface enabled with IPSG cannot be configured as the trusted interface. If an interface joins an aggregation group, IPSG cannot be enabled on the interface. An interface enabled with IPSG cannot join an aggregation group.

Configure port mirroring on the S1700-FR or S1700-GFR switch
Configure port mirroring on an S1700-FR or S1700-GFR switch as follows: 1. Choose Device Management > Interface Mirror. 2. Select Interface List and select a value from the Frame Type drop-down list box. 3. Select an interface from the Source Interface list as the source port of port mirroring. 4. Select an interface from the Destination Interface list as the destination port of port mirroring. 5. Click Add or Apply. For example, Rx data on Ethernet0/0/1 needs to be mirrored to Ethernet0/0/2.

Configure STP on an interface of an S1700-FR or S1700-GFR switch
Configure STP on an interface of an S1700-FR or S1700-GFR switch as follows: 1. Choose Service Management > STP. 2. Click the STP Interface tab. 3. Select an interface from the interface list and click Configure. 4. Configure parameters on the page displayed. 5. Click Apply.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top