Query MAC address entries on the S1700-FR or S1700-GFR switch

21

Query MAC address entries on an S1700-FR or S1700-GFR switch as follows:
1. Choose Service Management > MAC.
2. Select MAC Address Table. The bound static MAC address or dynamic MAC addresses are displayed.

Other related questions:
Add blackhole MAC address entries on the S1700-FR or S1700-GFR switch
Add blackhole MAC addresses to the MAC address table on an S1700-FR or S1700-GFR switch as follows: 1. Choose Service Management > MAC. 2. Select Blackhole MAC Table and click New. 3. On the page displayed, enter information about the blackhole MAC address to be added, and click Apply.

Query ARP entries on the S1700-FR or S1700-GFR switch
Query ARP entries on an S1700-FR or S1700-GFR switch as follows: 1. Choose System Management > ARP. 2. Select Static ARP or Dynamic ARP. Information about bound static addresses or dynamic addresses is displayed.

Add static MAC address entries on the S1700-FR or S1700-GFR switch
Add a static MAC address entry for an S1700-FR or S1700-GFR switch as follows: 1. Choose Service Management > MAC. 2. Select Static MAC Table and click New. 3. Select an interface, specify a MAC address for the interface, and click Apply.

Query STP information on the S1700-FR or S1700-GFR switch
Query STP information on an S1700-FR or S1700-GFR switch as follows: 1. Choose Service Management > STP. 2. Click the STP Information tab. 3. The configured parameters (such as STP Status, Port Role, CIST Bridge, Path Cost, and Priority are displayed.

Add a static ARP entry on the S1700-FR or S1700-GFR switch
Add a static ARP entry on an S1700-FR or S1700-GFR switch as follows: 1. Choose System Management > ARP. 2. Select Static ARP page and click New. 3. Configure an IP address and MAC address for the interface to be added, and click Apply.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top