Configure port mirroring on the S1700-FR or S1700-GFR switch

31

Configure port mirroring on an S1700-FR or S1700-GFR switch as follows:
1. Choose Device Management > Interface Mirror.
2. Select Interface List and select a value from the Frame Type drop-down list box.
3. Select an interface from the Source Interface list as the source port of port mirroring.
4. Select an interface from the Destination Interface list as the destination port of port mirroring.
5. Click Add or Apply.
For example, Rx data on Ethernet0/0/1 needs to be mirrored to Ethernet0/0/2.

Other related questions:
Configure bidirectional port isolation on the S1700-FR or S1700-GFR switch
Configure bidirectional port isolation on an S1700-FR or S1700-GFR switch as follows: 1. Choose Security > Interface Isolation. 2. Click the Two-way Isolation tab. 3. Select the interface on which bidirectional port isolation is configured and click Configure. 4. Select Enable from the Status drop-down list box to enable bidirectional port isolation. 5. Click Apply.

Configure unidirectional port isolation on the S1700-FR or S1700-GFR switch
Configure unidirectional port isolation on an S1700-FR or S1700-GFR switch as follows: 1. Choose Security > Interface Isolation. 2. Click the One-way Isolation tab. 3. Select the interface on which unidirectional port isolation is configured and click Configure. 4. Set Status to isolate or not isolate and select data flows in the interface list. 5. Select interfaces to be isolated or not isolated. 6. Click Apply.

Configure a VLAN on the S1700-FR or S1700-GFR switch
Configure a VLAN on an S1700-FR or S1700-GFR switch as follows: 1. Create a VLAN. a. Choose Service Management > VLAN and click the VLAN tab. VLANs configured on the switch are displayed. b. Click New to create a VLAN. c. Set a VLAN ID and VLAN name, and click Apply. 2. Add an interface to the VLAN. a. Choose Service Management > VLAN and click the Interface tab. b. Select an interface from the interface list and click Configure to modify the VLAN attributes of the interface. c. After completing the configuration, click Apply.

Save the configuration of an S1700-FR or S1700-GFR switch
Save the configuration of an S1700-FR or S1700-GFR switch as follows: After all configuration operations are completed, click Parameter Saving in the menu bar.

Configure IPSG on the S1700-FR or S1700-GFR switch
Configure IPSG on an S1700-FR or S1700-GFR switch as follows: 1. Choose Security > IPSG. 2. Select the interface on which IPSG is configured and click Configure. 3. Set IPSG Status to Enable. 4. Select an IPSG policy bound to the interface from the IPSG Matching Options drop-down list box. 5. Click Apply. Note: If IPSG is enabled on an interface where no binding table is configured, the interface blocks all IP data packets. IPSG cannot be enabled on a DHCP snooping trusted interface. An interface enabled with IPSG cannot be configured as the trusted interface. If an interface joins an aggregation group, IPSG cannot be enabled on the interface. An interface enabled with IPSG cannot join an aggregation group.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top