Configure Eth-Trunk on the S1700-FR or S1700-GFR switch

102

Configure an Eth-Trunk on an S1700-FR or S1700-GFR switch as follows:
1. Add a trunk.
a. Choose Interface Management > Eth-Trunk.
b. Click New to create a trunk group.
c. On the page displayed, configure trunk parameters and add member interfaces to the trunk group.
d. Click Apply.
2. Set trunk properties.
a. Choose Interface Management > Eth-Trunk.
b. Click the editing icon on the right of the trunk to be configured.
c. Configure trunk parameters.
d. Click Apply.

Other related questions:
Configure an interface of the S1700-FR or S1700-GFR switch as a trunk interface
Configure an interface on an S1700-FR or S1700-GFR switch as a trunk interface as follows: 1. Choose Service Management > VLAN and click the Interface tab. 2. Select an interface from the interface list and click Configure to modify the VLAN attributes of the interface. 3. Set the link type of the interface to Trunk and configure a VLAN ID. 4. After completing the configuration, click Apply.

Configure a VLAN on the S1700-FR or S1700-GFR switch
Configure a VLAN on an S1700-FR or S1700-GFR switch as follows: 1. Create a VLAN. a. Choose Service Management > VLAN and click the VLAN tab. VLANs configured on the switch are displayed. b. Click New to create a VLAN. c. Set a VLAN ID and VLAN name, and click Apply. 2. Add an interface to the VLAN. a. Choose Service Management > VLAN and click the Interface tab. b. Select an interface from the interface list and click Configure to modify the VLAN attributes of the interface. c. After completing the configuration, click Apply.

Save the configuration of an S1700-FR or S1700-GFR switch
Save the configuration of an S1700-FR or S1700-GFR switch as follows: After all configuration operations are completed, click Parameter Saving in the menu bar.

Configure IPSG on the S1700-FR or S1700-GFR switch
Configure IPSG on an S1700-FR or S1700-GFR switch as follows: 1. Choose Security > IPSG. 2. Select the interface on which IPSG is configured and click Configure. 3. Set IPSG Status to Enable. 4. Select an IPSG policy bound to the interface from the IPSG Matching Options drop-down list box. 5. Click Apply. Note: If IPSG is enabled on an interface where no binding table is configured, the interface blocks all IP data packets. IPSG cannot be enabled on a DHCP snooping trusted interface. An interface enabled with IPSG cannot be configured as the trusted interface. If an interface joins an aggregation group, IPSG cannot be enabled on the interface. An interface enabled with IPSG cannot join an aggregation group.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top