Restore factory settings of the S1700

119

Restore factory settings of the S1700 using either of the following methods:
1. Hold down the Reset button.
When you hold down the Reset button for more than 5s, the switch restarts and restores the factory settings.
(If you forget the changed management IP address or password of a switch, you can hold down the Reset button to restore factory settings of the switch.)
2. Restore the factory settings through the web.
a. Choose System Management > Reset Factory.
b. Click Reset Factory.
c. Click Apply.

Other related questions:
Restore factory settings
You can run the reset saved-configuration command in the user view to delete the configuration file for the next startup, so that the switch restarts with the default factory settings. # Delete the configuration file for the next startup. reset saved-configuration The action will delete the saved configuration on the device. The configuration will be erased to reconfigure.Continue? [Y/N]: y Warning: Now clearing the configuration in the device. Info: Succeeded in clearing the configuration in the device. reboot slot 1: Next startup system software: flash:/basicsoftware.cc Next startup saved-configuration file: NULL Next startup paf file: default Next startup patch package: NULL Warning: The current configuration will be saved to the next startup saved-confi guration file. Continue? [Y/N]: n Warning: The system will reboot. Continue? [Y/N]: y

How can I restore the MCU to factory defaults?
To restore the MCU to factory defaults in CLI mode, perform the following operations: 1. Log in to the MCU as the administrator user in SSH2 mode. 2. Run the file rm-config command to delete the configuration file. 3. Run the reboot command to restart the MCU. After the MCU is restarted, all configurations are restored to factory defaults.

How can I restore an IPC to factory defaults?
An IPC can be restored to factory defaults in one of the following ways: Hold down the RESET button on the IPC for over 3s. Use SSH to log in to an IPC as the admin user and run the rm -f /usr/log/config* and rm -f /usr/setting/config* commands. Then, run the reboot -f command to restart the IPC. Restore the camera to factory defaults on the IPC web page. For details, see the Online Help of the required IPC model.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top