Do I have other ways to access web proxy resources, apart from clicking the link on the SSL VPN gateway page

30

Yes. You can enter the URL in Internet Explorer.

Other related questions:
Problem and solution when the firewall cannot access web proxy resources
What if the web proxy resource page cannot be accessed? Solution: 1. Check whether the configured URL is correct. 2. If the configured URL is correct, ensure that the configured intranet URL can be properly accessed. 3. If the fault persists, try the web link mode. Note: To ensure that the web link function takes effect, use Internet Explorer and install the ActiveX control.

Why opening the web login page of the SSL VPN gateway is slow
NOTE: The Windows 7 operating system is used as an example. The SSL VPN gateway runs on the HTTPS server. The possible causes are as follows: -The browser has no root certificate of the HTTPS server installed. -The browser has an incorrect root certificate of the HTTPS server installed. Solution 1: 1. When you open the web login page of the SSL VPN gateway, the system displays the root certificate. 2. Install the root certificate to the browser. Choose Install Certificate > Next > Place all certificates in the following store > Browse, select Trusted Root Certification Authorities, and click OK. Solution 2: 1. Manually obtain the correct root certificate of the HTTPS server. Contact the enterprise network administrator. 2. Save the root certificate to the local device. 3. Install the root certificate to the browser. Choose Install Certificate > Next > Place all certificates in the following store > Browse, select Trusted Root Certification Authorities, and click OK.

USG firewall configure SSL VPN WEB proxy
The USG firewall configure the SSL VPN Web proxy Web proxy supports external network users through the USG access to the Web server resources, to provide users with HTTP-based Web application services. Before the configuration to ensure that the license file has been loaded, the USG can access the internal network resources. Configuration ideas: 1. Create a virtual gateway in the USG, which can access the Web resources of the intranet through this virtual gateway. The IP address of the virtual gateway is the public network IP. 2. Configure the Web proxy resources so that the external network users can access the WEB service of the internal network through the virtual gateway after logging in to the virtual gateway. 3. Configure the authentication mode as VPNDB and add VPNDB users. VPNDB user name and password is the external network user login virtual gateway need to enter the user name and password.

Why is a user still displayed online on the SSL VPN gateway after the user closes the SSL VPN gateway page on a client
The user may only close the current tab or the browser without clicking Logout. After the previous operation, the user account is still displayed as an online user on the SSL VPN gateway. Wait a period of time and you can see that the user account is deleted from the user list. This waiting period is the session timeout time.

Configuring SSL VPN in dual-link access scenarios on the firewall
For an exclusive virtual gateway, you can configure two virtual gateway addresses on a virtual gateway. A maximum of three IP addresses are allowed. For a shared virtual gateway, you can configure only one virtual gateway address on a virtual gateway. During dual-link access, you need to configure a virtual gateway for each link.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top