how to limit the flow of IPSec VPN with the USG6000


Speed-limit command can be executed for IPSec current limiting.When building the multi tunnel in NGFW, when large data traffic will generate traffic conflict, by configuring the speed-limit command, can limit the packets flow of each IPSec tunnel, exceeds the limit of the traffic will be discarded, ensure the traffic on each of the tunnel have been transferred.

Other related questions:
How to configure an AR to limit the rate of IPSec data flows
To configure an AR to limit the rate of IPSec data flows, configure the QoS function for IPSec packets first, and then configure rate limiting for IPSec data flows through MQC. system-view [Huawei]ipsec policy huawei 1 manual //Create an IPSec policy, set the SA creation mode to manual, and enter the IPSec policy view. Alternatively, you can complete the following configurations in the ISAKMP policy view, IPSec policy template view, IPSec profile view, Efficient VPN policy view, or GDOI policy view. [Huawei-ipsec-policy-manual-huawei-1]qos group 10 //Configure the QoS group to which IPSec packets belong. [Huawei-ipsec-policy-manual-huawei-1]quit [Huawei]traffic classifier c1 //Create a traffic classifier and enter the traffic classifier view. [Huawei-classifier-c1]if-match qos-group 10 //Configure a matching rule based on QoS group 10. [Huawei-classifier-c1]quit [Huawei]traffic behavior b1 //Create a traffic behavior and enter the traffic behavior view. [Huawei-behavior-b1]car cir 3000 //Limit the rate of traffic. [Huawei-behavior-b1]quit [Huawei]traffic policy p1 //Create a traffic policy and enter the traffic policy view. [Huawei-trafficpolicy-p1]classifier c1 behavior b1 //Bind the traffic classifier to the traffic behavior. [Huawei-trafficpolicy-p1]quit [Huawei]interface GigabitEthernet 0/0/0 [Huawei-GigabitEthernet0/0/0]traffic-policy p1 outbound //Apply the traffic policy on the interface

Rate limiting for IPSec VPN tunnels of the USG6000 series
On the USG6000 series, rate limiting can be implemented for IPSec VPN tunnels by using two methods. Method 1: If multiple tunnels are established on the USG, traffic conflicts occur in the case of heavy data traffic. In this case, run speed-limit to limit the traffic in each IPSec tunnel. Excess packets are discarded. This ensures that all packets in each tunnel are transmitted properly. If the traffic coming through a tunnel to a local port is heavy, run inbound to limit the traffic coming from this IPSec tunnel to the local port. If the traffic forwarded by the local port is heavy, run outbound to limit the traffic forwarded by the local port to the IPSec tunnel. After a security policy is applied on an interface, you cannot run speed-limit to modify the limited rate in the security policy. If an IPSec security policy is configured in any of the following modes, you can run speed-limit { inbound | outbound } speed-limit to limit the traffic rate of the IPSec tunnel. �?Manual mode �?Template mode �?Internet Key Exchange (IKE) non-policy template mode Method 2: After traffic policies are configured, if the actual address before VPN encapsulation or after decapsulation is matched, the traffic rate of the IPSec VPN can be limited. Assume that the actual address before VPN encapsulation is The configuration method is as follows: [sysname] traffic-policy [sysname-policy-traffic] rule name 1 [sysname-policy-traffic-rule-1] source-address 32

Method used to limit IPSec VPN traffic on the USG6000
You can run the speed-limit command to limit the IPSec traffic. When multiple tunnels are established on the NGFW, traffic conflict occurs in case of heavy traffic. By configuring the speed-limit command, you can limit the traffic on each IPSec tunnel. The traffic beyond the limit is discarded. In this manner, traffic on each tunnel can be transmitted.

Limiting IPSec traffic
You can use a traffic policy to limit IPSec traffic. In a traffic policy, esp or ah is used as the matching condition. The service corresponds to IPSec traffic.

IIPsec VPN is an encrypted tunneling technology that uses encrypted security services to establish confidential and secure communication tunnels between different networks.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top